RULES AND REGULATIONS
Title 25--ENVIRONMENTAL PROTECTION
DEPARTMENT OF ENVIRONMENTAL PROTECTION
[25 PA. CODE CH. 121]
Corrective Amendment to 25 Pa. Code § 121.1
[35 Pa.B. 2278]
The Department of Environmental Protection has discovered a discrepancy between the agency text of 25 Pa. Code § 121.1 (relating to definitions) as deposited with the Legislative Reference Bureau and published at 31 Pa.B. 6921 (December 21, 2001) and the official text of 25 Pa. Code § 121.1 as codified in the March 2002 Pennsylvania Code Reporter (Master Transmittal Sheet No. 328), and as currently appearing in the Pennsylvania Code. When the amendments at 31 Pa.B. 6921 were codified, the definition of the term ''solvent'' was inadvertently deleted.
Therefore, under 45 Pa.C.S. § 901: The Department of Environmental Protection has deposited with the Legislative Reference Bureau a corrective amendment to 25 Pa. Code § 121.1. The corrective amendment to 25 Pa. Code § 121.1 is effective as of March 2, 2002, the date the defective official text was announced in the Pennsylvania Bulletin.
The correct version of 25 Pa. Code § 121.1 appears in Annex A, with ellipses referring to the existing text of the regulation.
TITLE 25. ENVIRONMENTAL PROTECTION
PART I. DEPARTMENT OF ENVIRONMENTAL PROTECTION
Subpart C. PROTECTION OF NATURAL RESOURCES
ARTICLE III. AIR RESOURCES
CHAPTER 121. GENERAL PROVISIONS
§ 121.1. Definitions.
The definitions in section 3 of the act (35 P. S. § 4003) apply to this article. In addition, the following words and terms, when used in this article, have the following meanings, unless the context clearly indicates otherwise:
* * * * *
Solid film lubricant--A very thin coating, applied to aerospace vehicles or components, consisting of a binder system which contains as its chief pigment material one or more of the following:
(iii) Polytetrafluoroethylene (PTFE).
(iv) Other solids that act as a dry lubricant between faying surfaces.
Solvent--Organic compounds which are liquid at standard conditions and which are used as dissolvers, viscosity reducers or cleaning agents.
Solvent/air interface--For a vapor cleaning machine, the location of contact between the concentrated solvent layer and the air. This location of contact is the midline height of the primary condenser coils. For a cold cleaning machine, the location of contact between the liquid solvent and the air.
* * * * *
[Pa.B. Doc. No. 05-702. Filed for public inspection April 15, 2005, 9:00 a.m.]
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Bulletin full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.