[33 Pa.B. 2990]
[Continued from previous Web Page]
PUBLIC WATER SUPPLY (PWS) PERMIT Under the Pennsylvania Safe Drinking Water Act, the following parties have applied for a PWS permit to construct or substantially modify a public water system.
Persons wishing to comment on a permit application are invited to submit a statement to the office listed before the application within 30 days of this public notice. Comments received within this 30-day comment period will be considered in the formulation of the final determinations regarding the application. Comment responses should include the name, address and telephone number of the writer and a concise statement to inform the Department of Environmental Protection (Department) of the exact basis of a comment and the relevant facts upon which it is based. A public hearing may be held after consideration of comments received during the 30-day public comment period.
Following the comment period, the Department will make a final determination regarding the proposed permit. Notice of this final determination will be published in the Pennsylvania Bulletin at which time this determination may be appealed to the Environmental Hearing Board.
The permit application and any related documents are on file at the office listed before the application and available for public review. Arrangements for inspection and copying information should be made with the office listed before the application.
Persons with a disability who require an auxiliary aid, service or other accommodations to participate during the 30-day public comment period should contact the office listed before the application. TDD users may contact the Department through the Pennsylvania AT&T Relay Service at (800) 654-5984.
SAFE DRINKING WATER
Applications Received under the Pennsylvania Safe Drinking Water Act (35 P. S. §§ 721.1--721.17)
Northeast Region: Water Supply Management Program Manager, 2 Public Square, Wilkes-Barre, PA 18711-0790.
Permit No. 6603501, Public Water Supply.
Applicant Wyoming County Housing Authority
P. O. Box 350
Nicholson, PA 18446
Township or Borough Overfield Township, Wyoming County Responsible Official John J. Jennings, Executive Director Type of Facility PWS Consulting Engineer Acker Associates Consulting Engineers
P. O. Box 899
Moscow, PA 18444
Application Received Date March 7, 2003 Description of Action A new water system for a housing development which includes a well, pressure tank, storage tank, booster pumps and chlorination. Northcentral Region: Water Supply Management Program Manager, 208 West Third Street, Williamsport, PA 17701.
Application No. Minor Amendment--Construction, Public Water Supply.
Applicant The Pennsylvania State University
101 P Physical Plant Building
University Park, PA 16802-1118Township College Responsible Official Robert E. Cooper
Manager of Engineering Services
101 P Physical Plant Building
University Park, PA 16802-1118
Type of Facility PWS Consulting Engineer Scott E. Russell, P. E.
1200 West College Avenue
State College, PA 16801
Application Received Date June 12, 2003 Description of Action Utility construction of a raw water transmission main and water treatment plant. Application No. 5503501--Construction, Public Water Supply. Applicant Pennsylvania Suburban Water Company
204 East Sunbury Street
Shamokin, PA 17872Township Monroe Responsible Official Richard T. Subasic
Vice President and General Manager, Roaring Creek Division
204 E. Sunbury Street
Shamokin, PA 17872
Type of Facility PWS Consulting Engineer Peter J. Lusardi, P. E.
CET Engineering Services
1240 North Mountain Road
Harrisburg, PA 17112
Application Received Date June 13, 2003 Description of Action Water treatment improvements of Monroe Manor Wells 4--6. Application No. Minor Amendment--Construction, Public Water Supply. Applicant Pennsylvania American Water Company
800 West Hersheypark Drive
Hershey, PA 17033
Township Rush Responsible Official William C. Kelvington
Pennsylvania American Water Company
800 West Hersheypark Drive
Hershey, PA 17033
Type of Facility PWS Consulting Engineer Bruce E. Juergens
Pennsylvania American Water Company
800 West Hersheypark Drive
Hershey, PA 17033
Application Received Date June 16, 2003 Description of Action Relocation of the Trout Run Well treatment building from Penn Five to the Trout Run area.
MINOR AMENDMENT
Applications Received under the Pennsylvania Safe Drinking Water Act
Northeast Region: Water Supply Management Program Manager, 2 Public Square, Wilkes-Barre, PA 18711-0790.
Application No. Minor Amendment.
Applicant Auburn Municipal Authority Township or Borough Auburn Borough, Schuylkill County Responsible Official Ben Vaupel, Chairperson
Auburn Municipal Authority
P. O. Box 296
Auburn, PA 17922
(570) 752-4706
Type of Facility Community Water System Consulting Engineer Karen C. Pollock, P. E.
Systems Design Engineering, Inc.
4 Park Plaza
Wyomissing, PA 19610
(610) 320-5490
Application Received Date May 29, 2003 Description of Action Application request for replacement of an existing 34 year old 200,000 gallon steel storage tank with a 300,000 gallon concrete tank.
LAND RECYCLING AND ENVIRONMENTAL REMEDIATION
UNDER ACT 2, 1995
PREAMBLE 1
Acknowledgment of Notices of Intent to Remediate Submitted under the Land Recycling and Environmental Remediation Standards Act (35 P. S. §§ 6026.101--6026.908)
Sections 302--305 of the Land Recycling and Environmental Remediation Standards Act (act) require the Department of Environmental Protection (Department) to publish in the Pennsylvania Bulletin an acknowledgment noting receipt of Notices of Intent to Remediate. An acknowledgment of the receipt of a Notice of Intent to Remediate is used to identify a site where a person proposes to, or has been required to, respond to a release of a regulated substance at a site. Persons intending to use the Background Standard, Statewide Health Standard, the Site-Specific Standard or who intend to remediate a site as a special industrial area, must file a Notice of Intent to Remediate with the Department. A Notice of Intent to Remediate filed with the Department provides a brief description of the location of the site, a list of known or suspected contaminants at the site, the proposed remediation measures for the site and a description of the intended future use of the site. A person who demonstrates attainment of one, a combination of the cleanup standards or who receives approval of a special industrial area remediation identified under the act, will be relieved of further liability for the remediation of the site for any contamination identified in reports submitted to and approved by the Department. Furthermore, the person shall not be subject to citizen suits or other contribution actions brought by responsible persons not participating in the remediation.
Under sections 304(n)(1)(ii) and 305(c)(2) of the act, there is a 30-day public and municipal comment period for sites proposed for remediation using a Site-Specific Standard, in whole or in part, and for sites remediated as a special industrial area. This period begins when a summary of the Notice of Intent to Remediate is published in a newspaper of general circulation in the area of the site. For the sites identified, proposed for remediation to a site-specific standard or as a special industrial area, the municipality, within which the site is located, may request to be involved in the development of the remediation and reuse plans for the site if the request is made within 30 days of the date specified. During this comment period, the municipality may request that the person identified, as the remediator of the site, develop and implement a public involvement plan. Requests to be involved and comments should be directed to the remediator of the site.
For further information concerning the content of a Notice of Intent to Remediate, contact the Environmental Cleanup Program Manager in the Department Regional Office after which the notice appears. If information concerning this acknowledgment is required in an alternative form, contact the Community Relations Coordinator at the appropriate Regional Office listed. TDD users may telephone the Department through the AT&T Relay Service at (800) 654-5984.
The Department has received the following Notices of Intent to Remediate:
Southeast Region: Environmental Cleanup Program Manager, Lee Park, Suite 6010, 555 North Lane, Conshohocken, PA 19428.
Montgomery Mall--J. C. Penney, Montgomery Township, Montgomery County. Darryl Borrelli, Manko, Gold, Katcher & Fox LLP, 401 City Ave., Suite 500, Bala Cynwyd, PA 19004, on behalf of Stephen Sussman, Montgomeryville Associates, 234 Mall Blvd., King of Prussia, PA 19406, has submitted a Notice of Intent to Remediate soil and groundwater contaminated with fuel oil no. 2. The applicant proposes to remediate the site to meet the Statewide Health Standard. A summary of the Notice of Intent to Remediate was reported to have been published in The Record on June 16, 2003.
Edgewater Development, City of Philadelphia, Philadelphia County. Erik Stephens, Manko, Gold, Katcher & Fox LLP, 401 City Ave., Suite 500, Bala Cynwyd, PA 19004, on behalf of Steve Cupps, NM Edgewater Joint Venture, 1000 Chesterbrook Blvd., Suite 100, Berwyn, PA 19312, has submitted a Notice of Intent to Remediate soil contaminated with chlorinated solvents, inorganics, other organics and PAH; and groundwater contaminated with inorganics and other organics. The applicant proposes to remediate the site to meet the Statewide Health and Site-Specific Standards. A summary of the Notice of Intent to Remediate was reported to have been published in The Philadelphia Daily News on June 13, 2003.
Northcentral Region: Environmental Cleanup Program, 208 West Third Street, Williamsport, PA 17701.
Bernardi Italian Foods, Town of Bloomsburg, Columbia County. Keystone Environmental Services, Inc., on behalf of Bernardi Italian Foods, 595 West 11th Street, Bloomsburg, PA 17815, has submitted a Notice of Intent to Remediate soil and groundwater contaminated with other organics. The applicant proposes to remediate the site to meet the Statewide Health Standard. A summary of the Notice of Intent to Remediate was reported to have been published in the Press Enterprise on March 12, 2003. See additional information in the Actions section of this Pennsylvania Bulletin.
Northwest Region: Environmental Cleanup Program Manager, 230 Chestnut Street, Meadville, PA 16335-3481.
International Paper, City of Erie, Erie County. Douglas E. Kier, P. G., on behalf of Scott Newell, Site Env. Engineer, International Paper, 1540 East Lake Rd., Erie, PA 16533, has submitted a Notice of Intent to Remediate Soil and Groundwater contaminated with chlorinated solvents, diesel fuel, fuel oil no 2, inorganics, leaded gasoline, PAH, PCB and unleaded gasoline. The applicant proposes to remediate the site to meet the Site-Specific, Nonresidential Standards. A summary of the Notice of Intent to Remediate was reported to have been published in the Erie Times News on June 13, 2003.
OPERATE WASTE PROCESSING OR DISPOSAL AREA OR SITE
Application received under the Solid Waste Management Act (35 P. S. §§ 6018.101--6018.1003), the Municipal Waste Planning, Recycling and Waste Reduction Act (53 P. S. §§ 4000.101--4000.1904) and regulations to operate solid waste processing or disposal area or site.
Southeast Region: Regional Solid Waste Manager, Lee Park, Suite 6010, 555 North Lane, Conshohocken, PA 19428.
Permit Application No. 101069. SECCRA Landfill, P. O. Box 221, Kennett Square, PA 19348, London Grove Township, Chester County. The application is submitted to modify SECCRA's permit so that it may construct and operate a landfill gas-to-energy system. The application was received by the Southeast Regional Office on June 4, 2003.
AIR QUALITY
PLAN APPROVAL AND OPERATING PERMIT APPLICATIONS
NEW SOURCES AND MODIFICATIONS The Department of Environmental Protection (Department) has developed an ''integrated'' plan approval, State Operating Permit and Title V Operating Permit program. This integrated approach is designed to make the permitting process more efficient for the Department, the regulated community and the public. This approach allows the owner or operator of a facility to complete and submit all the permitting documents relevant to its application one time, affords an opportunity for public input and provides for sequential issuance of the necessary permits.
The Department has received applications for plan approvals and/or operating permits from the following facilities.
Copies of these applications, subsequently prepared draft permits, review summaries and other support materials are available for review in the regional office identified in this notice. Persons interested in reviewing the application files should contact the appropriate regional office to schedule an appointment.
Persons wishing to receive a copy of a proposed Plan Approval or Operating Permit must indicate their interest to the Department regional office within 30 days of the date of this notice and must file protests or comments on a Proposed Plan Approval or Operating Permit within 30 days of the Department providing a copy of the proposed document to that person or within 30 days of its publication in the Pennsylvania Bulletin, whichever comes first. Interested persons may also request that a hearing be held concerning the proposed plan approval and operating permit. Comments or protests filed with Department regional offices must include a concise statement of the objections to the issuance of the plan approval or operating permit and relevant facts which serve as the basis for the objections. If the Department schedules a hearing, a notice will be published in the Pennsylvania Bulletin at least 30 days prior the date of the hearing.
Persons with a disability who wish to comment and require an auxiliary aid, service or other accommodation to participate should contact the regional office identified. TDD users may contact the Department through the Pennsylvania AT&T Relay Service at (800) 654-5984.
Final plan approvals and operating permits will contain terms and conditions to ensure that the source is constructed and operating in compliance with applicable requirements in 25 Pa. Code Chapters 121--143, the Federal Clean Air Act (act) and regulations adopted under the act.
PLAN APPROVALS
Plan Approval applications received under the Air Pollution Control Act (35 P. S. §§ 4001--4015) and 25 Pa. Code Chapter 127, Subchapter B that may have special public interest. These applications are in review and no decision on disposition has been reached.
Northeast Region: Air Quality Program, 2 Public Square, Wilkes-Barre, PA 18711-0790; Contact: Mark Wejkszner, New Source Review Chief, (570) 826-2531.
39-304-009D: Ransom Industries, LP (Tyler Pipe-Penn Division, 101 North Church Street, Macungie, PA 18062) for the construction of an additional grinding operation and channeling the unit to an existing air cleaning device at their facility in Macungie Borough, Lehigh County.
54-310-028A: Lehigh Asphalt Paving and Construction Co. (P. O. Box 549, Tamaqua, PA 18252) for the construction of a VSI crusher (replacement of an existing crusher) and associated air cleaning device at their facility at the Andreas Quarry, West Penn Township, Schuylkill County.
54-302-072: van Hoekelen Greenhouses, Inc. (Route 309, P. O. Box 88, McAdoo, PA 18237-0088) for the construction of one coal fired boiler, one oil fired boiler and one emergency generator at their facility in Kline Township, Schuylkill County.
Southcentral Region: Air Quality Program, 909 Elmerton Avenue, Harrisburg, PA 17110; Contact: Ronald Davis, New Source Review Chief, (717) 705-4702.
06-05014C: Garden State Tanning, Inc. (16 South Franklin Street, Fleetwood, PA 19522) to modify a surface coating line (no. 1) by constructing a roll coater in the Borough of Fleetwood, Berks County. The source is subject to 40 CFR Part 63, Subpart TTTT--National Emission Standards for Hazardous Air Pollutants from Leather Coating Facilities.
Southwest Region: Air Quality Program, 400 Waterfront Drive, Pittsburgh, PA 15222-4745; Contact: William Charlton, New Source Review Chief, (412) 442-4174.
04-00707C: Colona Transfer, L. P. (P. O. Box 311, Currie Road, Portersville, PA 16051) for installation of bridge crane clamshell bucket to be used for off loading barges on the Ohio River at Colona Dock in Monaca Borough, Beaver County.
Northwest Region: Air Quality Program, 230 Chestnut Street, Meadville, PA 16335-3481; Contact: Devendra Verma, New Source Review Chief, (814) 332-6940.
24-025A: Alpha Sintered Metals, Inc. (95 Mason Run Road, Ridgway, PA 15853) for the installation of Sly Baghouse collection system in the mixing room of their powdered metal component manufacturing facility in Ridgway Township, Elk County. This is a State-only facility.
37-321A: New Castle Recycling, Inc. (215 Gardner Ave., New Castle, PA 16101) for post construction plan approval of an existing dust collection system to capture fugitive emissions from scrap metal torch cutting operation in the City of New Castle, Lawrence County.
Intent to Issue Plan approvals and intent to issue or amend Operating Permits under the Air Pollution Control Act and 25 Pa. Code Chapter 127, Subchapter B. These actions may include the administrative amendments of an associated operating permit.
Southeast Region: Air Quality Program, Lee Park, Suite 6010, 555 North Lane, Conshohocken, PA 19428; Contact: Edward Brown, Facilities Permitting Chief, (610) 832-6242.
46-0037N: Cabot Supermetals (County Line Road, P. O. Box 1608, Boyertown, PA 19512-1608) for their plant in Douglass and Colebrookdale Townships, Montgomery and Berks Counties. Under 25 Pa. Code §§ 127.44(a) and 127.424(b), the Department intends to issue a Plan Approval to authorize the applicant to construct:
A. Four 15-S and one 30-S Attritor mills installed in 1991 and 1996 in Building 47.
B. The 4th tantalum extraction line installed in 1993 in Building 74.
C. One KTaF tray dryer, new KTaF crystal recovering system, a heating tank and additional filter containers installed in 1992 in Building 19 as described in the Applicant's application of December 2001 and subsequent submissions. The Plan Approval will subsequently be incorporated into the company's Title V Operating Permit through an administrative amendment in accordance with 25 Pa. Code § 127.450.
Based on the information provided by the Applicant and the Department's own analysis, this operation will emit 165.1 tons per year of VOCs. This is a major facility subject to 25 Pa. Code Chapter 127, Subchapter E. The company shall provide 219.3 tons of VOC emission reduction credits (ERC) at a 1.3:1 ratio to offset the increase in potential to emit from the proposed construction/modification prior to obtaining an operating permit in accordance with 25 Pa. Code § 127.206(d).
In March 2002, the Department approved the transfer of 40 tpy of VOC ERCs from Cypress Energy, L. P. in Maryland to PCM to offset VOC emission increase. The Department plans to approve 132.5 tons of VOC ERC generated from CSM by installing a VOC recovery unit. CSM shall provide additional 56 tons of VOC ERCs to offset all the remaining emission increases to meet the New Source Review requirements of 25 Pa. Code Chapter 127, Subchapter E.
Copies of the application, the Department's analysis and other documents used in the evaluation of the application are available for public review during normal business hours at Southeast Regional Office, Lee Park, Suite 6010, 555 North Lane, Conshohocken, PA.
Interested persons may submit written comments, suggestions or objections concerning the proposed Plan Approval to the regional office within 30 days of publication of this notice. Written comment submitted to the Department during the 30-day public comment period should include the name, address and telephone number of the commentator, identification of proposed Permit No. PA-46-0037N and a concise statement regarding the relevancy of the information or objections to the issuance of the permit.
A public hearing may be held, if the Department, in its discretion, decides that a hearing is warranted based on the comments received. Persons submitting comments or requesting a hearing will be notified of the decision to hold a hearing by publication in the newspaper or the Pennsylvania Bulletin or by telephone, where the Department determines notification is sufficient. Written comments or requests for a public hearing should be directed to Francine Carlini, Regional Manager, Air Quality, Department of Environmental Protection, Southeast Regional Office, Lee Park, Suite 6010, 555 North Lane, Conshohocken, PA 19628, (610) 832-6242.
To assure compliance with the applicable standards, the Department will place the following conditions on the plan approval:
General Requirements
Part I
1. This Plan Approval is issued to the permittee for the construction of the following sources:
A. Four 15-S and one 30-S Attritor mills installed in 1991 and 1996 in Building 47.
B. The 4th tantalum extraction line was installed in 1993 in Building 74.
C. One KTaF tray dryer, new KTaF crystal recovering system, a heating tank and additional filter bottoms were installed in 1992 in Building 19.
2. The permittee shall comply with all of the existing requirements of its Operating Permit No. TVOP-46-00037 and Plan Approval No. PA-46-0037M for Building 47 modification, except as specified in this Plan Approval. This Plan Approval supersedes previously issued Plan Approvals and Plan Approval Extensions bearing the numbers PA-46-0037D and PA-46-0037H.
3. New source review requirements.
A. The following indicates the emission increases at CSM facility from 1991--2001. The emissions increases shall be offset at the ratio specified in the following table.
Sources Buildings Installation Year VOC Emissions Offset Ratio Required ERC Batch Attritor Mills 47/101 1991 8.0 10.4 Crystallizers and Tanks 19 1992 63.1 82.03 4th Tantalum Line 74 1993 77.9 101.27 Batch Attritor Mills 47/101 1996 16.1 1.3:1.0 20.93 Emergency Generators 1996 0.2 0.26 Emergency Generators 1999 0.32 0.42 Process Modification 55 2001 2.56 1.0:1.0 2.56 Boiler House 2001 1.42 1.42 Total 169.6 219.3 The CSM shall provide 219.3 tons of VOC ERCs to offset all VOC emission increases at the facility.
B. CSM is eligible for 123.85 tpy of VOC ERCs resulting from the use of the methyl isobutyl ketone (MIBK) recovery unit. Registration of the VOC ERCs in the Pennsylvania ERC Registry System will constitute certification that the ERCs meet the ERC-generating requirements and are available for use.
ERC Generating Sources Average actual emissions in tpy before MIBK recovery unit
(1998--1999)MIBK PTE in tpy after MIBK
recovery systemActual emissions (tpy) of sources installed without plan approvals ERC in tpy A
B C D =B-C-D 19
189.4 + 166.6 = 178
58.3 41.0 78.70 23
27.2 + 20.8 = 24
0.0 0.0 24.00 74
204.3 + 176.8 = 190.55 160.8 47.6 0.00 WWTP
60.9 + 51.8 = 56.35
22.4 12.8 21.10 Total ERCs =
123.85 C. The Department approved 40 tons of VOC ERCs transfer from Cypress Energy, L. P. in Maryland to CSM.
D. CSM shall provide additional 56 tons of VOC ERCs to offset all the remaining emission increases to meet the New Source Review requirements of 25 Pa. Code Chapter 127, Subchapter E.
E. CSM created ERCs by installing an MIBK recovery system. To create the ERCs, the MIBK recovery unit shall be operated at an overall annual percentage recovery efficiency of at least 75%, by weight, exclusive of downtime of the MIBK recovery system for required maintenance, to the extent that maintenance does not exceed 250 hours in any rolling 12 month period.
F. CSM shall not exceed a facility wide MIBK usage rate of 241.5 tons per year as a 12-month rolling sum as calculated by an emission factor of 0.105 lb MIBK/lb of KtaF and maximum production rate of 4.6 million lbs per year in a 12-month rolling sum.
G. The VOC emissions from the waste water treatment Plant (WWTP) shall not exceed 22.4 tons as MIBK per year as a 12-month rolling sum. The WWTP consists of the following units: six segregation tanks, nine neutralization tanks, transfer pump station (I-tank), holding tanks (E/EE-tanks), filter press and filtrate tank, settling basin (lagoon 5) and neutralization basin (lagoon 6). Compliance with the emission limit shall be determined based on a mass balance.
H. The VOC emissions from each building shall not exceed the limits specified:
VOC from the VOC from WWTP Pollutants Source Location Building (tpy) WWTP (tpy) Total (tpy) MIBK Buildings 19 and 23
58.3 2.9 61.2 MIBK Building 74
160.8 19.5 180.3 Ethanl SDA Building 47
2.1 22.0 24.1 Other VOC Buildings 55, 106, 93
2.7 Miscellaneous VOC Laboratory (Buildings 11 and 41)
3 Total
44.4 268.3
Part II
1. This Plan Approval revises and supersedes the requirements in Plan Approval No. PA-46-0037H and also allows the modification of the following sources in Building 74:
A. Conversion of the two existing Niobium (Nb) processing lines into lines capable of processing Tantalum (Ta) or (Nb).
B. Modification of the existing processes capable of performing the extraction step in the Atlas boxes and the stripping step in the Quinn unit.
C. Allowing any combination of existing Ta lines, converted Ta/Nb lines and Atlas boxes/Quinn unit to recover Ta/Nb metals.
D. Increasing the annual production rate of Potassium Tantalum Fluoride (KTaF) to 4.6 million pounds per 12-month rolling sum.
E. Installation of a MIBK recovery system consisting of a stripper column and flash unit. CSM shall maintain a spare flash system as a backup unit.
F. Installation of an intermediate storage tank.
2. Building No. 74 includes the following VOC emitting sources: any combination of equipment for Tantalum Line Nos. 1--4 and Ta/Nb Line Nos. 5 and 6; Atlas boxes and Quinn units; MIBK transfer tank; raffinate acidification tanks; feed tanks; raffinate storage tanks; fraction storage tank and other ancillary and support equipment or similar.
3. Additional Operating Requirements for Building 74.
A. Each Atlas box and the Quinn unit shall be covered when it contains VOC materials.
B. The emissions from the feed tanks, storage tanks, the intermediate storage tank and transfer tanks shall be ducted to the existing acid gas scrubber. The scrubber shall not be by-passed at any time when materials are in the tanks. The control efficiency shall be equal to or greater than 90%.
C. The permittee shall monitor the following parameters:
i. Pressure drop across the scrubber packing, utilizing a differential manometer or equivalent.
ii. Water flow rate to the scrubber, utilizing a rotameter or equivalent.
iii. Makeup water flow rate to the scrubber, utilizing a rotameter or equivalent.
4. Emission limitations.
A. HF emissions from the scrubber shall not exceed 10 ppm by volume, 0.2 pound per hour and 1.1 tons per year as a 12-month rolling sum.
B. The VOC emissions from Building 74 shall not exceed 160.8 tons as MIBK per year as a 12-month rolling sum.
5. Recordkeeping requirement.
A. The permittee shall keep daily records of HF concentration in the water recycled to the scrubber.
B. For the purpose of calculating MIBK emissions, the permittee shall measure and record the following information on a weekly basis:
i. MIBK tank inventory at the beginning of each week and the amount of MIBK received at the tank during the week.
ii. MIBK contents in the influent and effluent of the recovery system and the flow rates of the unit's influent and effluent.
iii. MIBK content in the effluent of the stripper (to the wastewater treatment plant) and the flow rates of the stripper effluent.
iv. The methods for measuring the MIBK content shall be submitted to the Department for approval prior to the issuance of this Plan Approval.
C. The permittee shall establish an emission tracking and calculation system to document actual VOC and HF emissions from each source category in Building 74. The Tracking and Calculation System shall be submitted to the Department for approval prior to the issuance of an Operating Permit. The tracking and calculation system shall be used to demonstrate compliance with all the Conditions of this Plan Approval.
6. Test requirements.
A. The permittee shall establish operating pressure drop range across the scrubber packing based on the stack test required.
B. The permittee shall conduct a performance test in accordance with the provisions of 25 Pa. Code Chapter 139 to show compliance with the emission limitations of this Plan Approval and to establish the relationship of the HF concentrations in the scrubber recycle water vs. the makeup water flow rate required in conditions of this Plan Approval. The stack test shall be performed while the source is operating at the maximum rated capacity specified in the plan approval application.
C. The permittee shall conduct a study to establish MIBK recovery system operating parameters to demonstrate the MIBK recovery efficiency described in the previous conditions. The study shall be submitted to the Department for approval. The Department will specify the required operating parameters prior to the issuance of the Operating Permit.
D. At least 60 days prior to conducting the performance test and the study, CSM shall submit to the Department for approval the procedures for the test and a sketch with dimensions indicating the location of sampling ports and other data to ensure the collection of representative samples.
E. Southeast Regional Air Quality Manager shall be notified of the date and time of the performance test at least 30 days prior to the test.
F. Within 30 days after conducting the performance tests, two copies of the complete test report, including all operating conditions, shall be submitted to the Regional Air Quality Manager for approval.
Part III
1. This Plan Approval supersedes all previously issued Plan Approvals bearing the number PA-46-0037D for Building 19.
2. Operating requirements.
A. Operation restrictions.
i. The two existing heating tanks are allowed to be operated concurrently. Each heating tank shall not exceed 84 batches per week.
ii. The Ta salt production shall be limited to 4.6 million pounds per year in a 12-month rolling sum.
B. The acid gases from the HF storage tank, the heating tanks, the crystallizers, the secondary recovery crystallizers and the tray dryers shall be vented to and controlled by Building 19 acid gases scrubber. The scrubber shall not be bypassed at any time when materials are in the units listed in this condition.
C. The owner and operator shall monitor the following parameters as identified by the study specified in the conditions:
i. Pressure drop across the scrubber packing, utilizing a differential manometer, or equivalent.
ii. Water flow rate to the scrubber, utilizing a rotameter or equivalent.
iii. Makeup water flow rate to the scrubber, utilizing a rotameter or equivalent.
D. The owner and operator shall establish a minimum operating pressure drop across the packing based on the study specified in the following conditions.
E. The owner and operator shall conduct a study to establish a relationship of the HF concentrations in the scrubber recycle water vs. the makeup water flow rate. The results of the study shall be submitted to the Department for approval and for establishing minimum makeup water flow rate required.
3. Emission limitations.
A. HF emissions from the scrubber shall not exceed 10 ppm by volume, 0.73 pound per hour and 3.2 tons per year as a 12-month rolling sum.
B. The VOC emissions from Building No. 19 shall not exceed 58.3 tons as MIBK per year as a 12-month rolling sum. Building No. 23 shall not emit any MIBK.
C. HCl emissions should not exceed 0.15 pound per hour and 0.67 ton per year in a 12-month rolling sum.
D. PM emissions shall not exceed 0.59 pound per hour and 2.6 tons per year in a 12-month rolling sum.
4. Recordkeeping requirement.
A. The owner and operator shall keep records of weekly HF usage in Building 19.
B. The owner and operator shall keep records of Ta salt produced on a weekly basis.
5. Test requirements.
A. The permittee shall establish operating pressure drop range across the scrubber packing based on the following stack test required.
B. The permittee shall conduct a performance test in accordance with the provisions of 25 Pa. Code Chapter 139 to show compliance with the emission limits stated in previous conditions and to establish the relationship of the HF concentrations in the scrubber recycle water vs. the makeup water flow rate required in the conditions of this Plan Approval. The stack test shall be performed while the source is operating at the maximum rated capacity specified in the plan approval application.
C. At least 60 days prior to conducting the performance test, CSM shall submit to the Department for approval the procedures for the test and a sketch with dimensions indicating the location of sampling ports and other data to ensure the collection of representative samples.
D. Southeast Regional Air Quality Manager shall be notified of the date and time of the performance test at least 30 days prior to the test.
E. Within 30 days after conducting the performance tests, two copies of the complete test report, including all operating conditions, shall be submitted to the Regional Air Quality Manager for approval.
46-0018C: Brown Printing Company (668 Gravel Pike, East Greenville, PA 18041-2199) for replacing a lithographic printing press and installing a regenerative thermal oxidizer at its facility in Upper Hanover Township, Montgomery County. This facility is a Title V facility. This replacement will result in 11.23 tons of VOCs per year to be emitted. The Plan Approval and Operating Permit will contain recordkeeping requirements and operating restrictions designed to keep the facility operating within all applicable air quality requirements.
46-0112B: Palmer International, Inc. (2036 Lucon Road, Skippack, PA 19474) for the installation of a Turbo Mixer, which will replace three existing Sigma Blenders, at their facility in Skippack Township, Montgomery County. This facility is a non-Title V facility. Along with all other processes in Building A, the new Turbo Blender will be subject to an emission limit of 21.0 tons per year for VOCs, 8.83 tons per year for HAPs (formaldehyde), 13.56 tons per for NOx and 43.8 tons per year for CO. Emissions of PM from all processes in Building A are expected to be less than 9 tons per year and emissions of SOx are expected to be less than 14 tons per year from all processes in Building A. The existing thermal oxidizer will control emissions of VOCs and HAPs. Emissions of PM will continue to be controlled by dust collectors and the existing thermal oxidizer. The Plan Approval will contain recordkeeping and further operating restrictions designed to keep the facility operating within the allowable emissions and all applicable air quality requirements.
09-0027E: Fres-co System USA, Inc. (3005 State Road, Telford, PA 18969) for the air cleaning devices installation and modification of its Telford facility in West Rockhill Township, Bucks County. This plant is a Title V facility. This installation and modification will result in 8.7 tons per year of NOx emissions to be emitted. The Plan Approval and Operating Permit will contain recordkeeping requirements and operating restrictions designed to keep the facility operating within all applicable air quality requirements.
Northeast Region: Air Quality Program, 2 Public Square, Wilkes-Barre, PA 18711-0790; Contact: Mark J. Wejkszner, New Source Review Chief, (570) 826-2531.
58-308-001: Baran's Surplus Company, Inc. (138 West Poplar Street, Plymouth, PA 18651) for the construction of an aluminum ''sweat'' furnace (an aluminum scrap melting furnace) on SR 3005, Auburn Township, Susquehanna County.
The respective furnace will be used to reclaim aluminum from aluminum scrap that contains substantial amounts of iron. The air contaminant emissions from the furnace will be controlled by a thermal afterburner. The resultant air contaminant emissions will be up to 0.468 ton of NOx, 0.109 ton of CO, 0.775 ton of SOx, 0.017 ton of hydrocarbons and 0.605 ton of PM.
The Department's review of the information contained in the application indicates that the proposed sweat furnace will comply with all applicable regulatory requirements pertaining to air contamination sources and the emission of air contaminants including the best available technology requirements of 25 Pa. Code §§ 127.1 and 127.12 and Subpart RRR of the National Emission Standards for Hazardous Air Pollutants (40 CFR 63.1500--63.1519, National Emission Standards for Hazardous Air Pollutants for Secondary Aluminum Production). Based on this finding, the Department intends to approve the application and issue plan approval.
39-313-045: Carpenter Company (57 Olin Way, Fogelsville, PA 18051) for the modification of the expanded polystyrene (EPS) manufacturing process and associated air pollution control equipment (boiler) at their Fogelsville Plant in Upper Macungie Township, Lehigh County. The modification will include installing a large boiler (replaces the existing boiler) to provide process steam and to be used as the control device for the EPS manufacturing process. The actual VOC emissions from the EPS manufacturing process will be a maximum of 88.8 tons per year which remains unchanged from the annual limit listed in the issued Title V Operating Permit. The Plan Approval and Operating Permit will contain emission limits, testing, monitoring, work practices, recordkeeping and reporting requirements designed to keep the facility operating within all applicable air quality requirements. The facility currently has a Title V Operating Permit No. 39-00040. This plan approval will, in accordance with 25 Pa. Code § 127.450, be incorporated into the Title V Operating Permit through an administrative amendment at a later date.
40-328-003A: Hunlock Creek Energy Ventures (390 Route 11, Hunlock Creek, PA 18621) for the modification and operation of a Simple Cycle Gas Turbine at their facility in Hunlock Township, Luzerne County. The plan approval limits NOx emissions from the turbine not to exceed 25 ppm (corrected to 15% O2), excluding start-up and shutdown periods. Also, the NOx emissions from the turbine shall not exceed 41 lbs/hr (3-hour rolling average) and 37.9 tons per year (12-month rolling sum), which include start-up and shutdown periods. The company is required to operate and maintain a Continuous Air Contaminants Emission Monitoring System, which is certified by the Department. The turbine will be limited to 1,850 annual operating hours as previously approved by the Department. The Plan Approval and Operating Permit will contain additional recordkeeping and operating restrictions designed to keep the facility operating within all applicable air quality requirements. The Plan Approval will, in accordance with 25 Pa. Code § 127.450, be incorporated into the Title V Operating Permit 40-00005 through an administrative amendment at a later date. For further details, contact Mark J. Wejkszner at (570) 826-2531 within 30 days after publication date.
Southcentral Region: Air Quality Program, 909 Elmerton Avenue, Harrisburg, PA 17110; Contact: Yasmin Neidlinger, Facilities Permitting Chief, (717) 705-4702.
06-03551: MGP, LLC (796 Fritztown Road, Sinking Spring, PA 19608) for the construction of a graphite milling facility controlled by five fabric collectors in Spring Township, Berks County. The facility is a non-Title V (State-only) facility. This construction will result in the potential to emit 13.4 tons per year of particulate. The approval will include monitoring work practices, recordkeeping and report requirements designed to keep the source within all applicable air quality requirements.
67-05069D: Oldcastle Stone Products (P. O. Box 220, Thomasville, PA 17364) for installation of a dolomitic limestone pelletizing system with associated controls at their Thomasville Facility in Jackson Township, York County. The new system is expected to be able to process approximately 30 tons per hour of limestone. Particulate matter emissions associated with the new system will be controlled by a bin vent dust collector and shall stay below 0.02 grain per dry standard cubic foot. The source is subject to 40 CFR 60, Subpart OOO--Standards of Performance for New Stationary Sources. The plan approval and operating permit shall contain additional recordkeeping and operating restrictions designed to keep the facility operating within all applicable air quality requirements.
Northcentral Region: Air Quality Program, 208 West Third Street, Williamsport, PA 17701; Contact: David Aldenderfer, Program Manager, (570) 327-3637.
14-00014A: Glenn O. Hawbaker, Inc. (711 East College Avenue, Bellefonte, PA 16823) for the construction of a cage mill stone crusher, screen and associated conveyors, the installation of an air cleaning device, a fabric collector, on a primary impact stone crusher, the construction of a recycled asphalt pavement crusher and screen, the construction of two aggregate bins and a recycled asphalt pavement bin, the construction of a 33,000 gallon reprocessed/recycled oil storage tank and the modification of a drum mix asphalt concrete plant by using no. 5 and no. 6 fuel oil and reprocessed/recycled oil as fuel in addition to the natural gas and no. 2 fuel oil which the plant is currently allowed to use at their Pleasant Gap facility on SR 64 in Spring Township, Centre County.
Fugitive PM emissions from the proposed cage mill crusher, screen and conveyors will be negligible due to the inherent wet nature of the material processed. The PM emissions from the exhaust of the proposed impact crusher fabric collector will not exceed .02 grain per dry standard cubic foot of collector exhaust. The fugitive PM emissions from the proposed recycled asphalt pavement crusher and screen, the two aggregate bins and the recycled asphalt pavement bin are expected to be negligible as are the VOC emissions from the proposed reprocessed/recycled oil storage tank. The asphalt concrete plant will emit no more then 46.5 pounds of NOx, 92 pounds of CO, 80.4 pounds of SOx and 36.5 pounds of VOCs when firing no. 5 fuel oil, no. 6 fuel oil or reprocessed/recycled oil nor will its fabric collector emit more than .02 grain of PM per dry standard cubic foot of collector exhaust. The total combined HAP emissions from the asphalt plant are not expected to exceed 6.92 tons in any 12 consecutive month period and the formaldehyde and toluene emissions are not expected to exceed 1.73 and 1.58 tons, respectively, in the same period.
Following the completion of the proposed construction, installation and modification, the entire facility will not emit more than 50.59 tons of NOx, 99.91 tons of CO, 88.83 tons of SOx, 39.96 tons of VOCs and 99.96 tons of PM10 in any 12 consecutive month period.
The Department has determined that the proposed construction, installation and modification will comply with all applicable regulatory requirements pertaining to air contamination sources and the emission of air contaminants including the best available technology requirements of 25 Pa. Code §§ 127.1 and 127.12. The Department consequently intends to approve the application and issue plan approval.
The following is a summary of the conditions the Department plans to place in the plan approval to be issued to ensure compliance with all applicable regulatory requirements:
1. The asphalt plant shall only be fired on gas (natural or LP), virgin no. 2 fuel oil, virgin no. 5 fuel oil, virgin no. 6 fuel oil or reprocessed/recycled oil. None of the oil used for fuel shall have a sulfur content in excess of .5% (by weight).
2. The reprocessed/recycled oil used as fuel in the asphalt plant shall not contain contaminants equal to or in excess of the following limitations:
Contaminant Limitation Arsenic 5 parts per million Cadmium 2 parts per million Chromium 10 parts per million Lead 100 parts per million total halides 1000 parts per million Polychlorinated biphenyls (PCBs) None detected (detection limit no higher than 2 parts per million) Additionally, the flashpoint of the reprocessed/recycled oil shall not be less than 140°F.
3. The permittee shall not accept for use in the asphalt plant any shipment of reprocessed/recycled oil for which the arsenic, cadmium, chromium, lead, total halides and PCB content and/or flashpoint are unknown or which fails to meet any established limitation for any of these, nor shall the permittee accept for use any shipment of any oil to be used as fuel for which the sulfur content is unknown or which fails to meet the limitation established herein for sulfur content.
4. A sample of each load of reprocessed/recycled oil delivered to the asphalt plant shall be taken at the time of delivery to the plant using a sampling technique capable of achieving a representative composite sample of the entire load and shall be retained onsite for at least 2 years for random selection and analysis by the Department. The samples are to be sealed and identified as to the date of delivery, delivery invoice number, and the like.
5. A sample of each shipment of reprocessed/recycled oil delivered to the asphalt plant shall be taken at the time of delivery to the plant using a sampling technique capable of achieving a representative composite sample of the entire load and analyzed for total halides concentration using EPA Method 9077. The results of these analyses will not, however, be accepted by the Department as a demonstration of compliance with the limitation established herein for total halides should they differ from the results of analyses performed using EPA Method 9076. The permittee shall also perform a complete analysis for all contaminants and parameters for which limitations have been established herein using reference methods specified by the Department on at least 1 out of every 15 shipments of reprocessed/recycled oil received.
6. The following analytical methods are to be employed to determine compliance with the contaminant limitations and flashpoint limitation specified herein unless the Department specifies an alternate method:
Contaminant/Property Analytical Method Arsenic EPA 200.8 and/or EPA 200.7 Cadmium EPA 200.8 and/or EPA 200.7 Chromium EPA 200.8 and/or EPA 200.7 Lead EPA 200.8 and/or EPA 200.7 Total halides EPA 9076 Sulfur ASTM D 4294 PCBs EPA 3580 for extraction and EPA 608 for analysis Flashpoint ASTM D 93 7. The permittee shall submit an annual report to the Department listing the delivery date, quantity delivered, origin and delivery invoice number of each shipment of reprocessed/recycled oil delivered to the asphalt plant during the previous calendar year as well as identifying the arsenic, cadmium, chromium, lead, total halides, PCB and sulfur contents and the flashpoint of each shipment. This report shall further identify the specific source of all analytical data provided and describe why this analytical data accurately represents the contaminant concentrations and flashpoint of the reprocessed/recycled oil delivered to the plant. This report shall be submitted by March 15 of each year.
8. The emission of particulate matter from the exhaust of the fabric collector controlling the emissions from the asphalt plant shall not exceed .02 grain per dry standard cubic foot of exhaust.
9. The NOx emissions from the asphalt plant shall not exceed .093 pound per ton of asphalt concrete produced when firing no. 5 fuel oil or reprocessed/recycled oil and .091 pound per ton when firing no. 6 fuel oil.
10. The carbon monoxide emissions from the asphalt plant shall not exceed .169 pound per ton of asphalt concrete produced when firing no. 5 fuel oil or reprocessed/recycled oil and .184 pound per ton when firing no. 6 fuel oil.
11. The SOx emissions from the asphalt plant shall not exceed .16 pound per ton of asphalt concrete produced when firing no. 5 fuel oil, no. 6 fuel oil or reprocessed/recycled oil.
12. The VOC emissions (expressed as methane) from the asphalt plant shall not exceed .07 pound per ton when firing no. 5 fuel oil or reprocessed/recycled oil and .073 pound per ton when firing no. 6 fuel oil.
13. The total combined HAP emissions from the asphalt plant shall not exceed 6.92 tons in any 12 consecutive month period, the formaldehyde emissions shall not exceed 1.73 tons in any 12 consecutive month period, the toluene emissions shall not exceed 1.58 tons in any 12 consecutive month period and the emission of any other individual HAPs shall not exceed 1 ton in any 12 consecutive month period.
14. The quantity of asphalt concrete produced in the asphalt plant shall not exceed 1,082,500 tons in any 12 consecutive month period.
15. The asphalt plant shall not process recycled asphalt pavement at a rate in excess of 25% of the total weight of all materials charged to the drum at any given time.
16. The asphalt plant shall be stack tested to determine the NOx, CO and VOC emission rates when firing no. 5 fuel oil and processing virgin material, when firing no. 5 fuel oil and processing a combination of virgin material and recycled asphalt pavement, when firing no. 6 fuel oil and processing virgin material, when firing no. 6 fuel oil and processing a combination of virgin material and recycled asphalt pavement, when firing reprocessed/recycled oil and processing virgin material and when firing reprocessed/recycled oil and processing a combination of virgin material and recycled asphalt pavement. The plant shall additionally be stack tested to determine its particulate matter emission rate while operating in any one of these six operating scenarios. Should the required NOx, CO and VOC stack testing not be performed for any of the six operating scenarios identified, the asphalt plant will not be authorized to operate using that operating scenario.
17. The emission of particulate matter from the exhaust of the fabric collector to be installed on the primary impact crusher shall not exceed .02 grain per dry standard cubic foot.
18. The fabric collector to be installed on the primary impact crusher shall be equipped with instrumentation to continuously monitor the pressure differential across the collector. Additionally, the air compressor used to supply compressed air to the collector shall be equipped with an air dryer and oil trap and spare fabric collector bags shall be kept on hand.
19. The only material which may be processed by the cage mill crusher, screen and associated conveyors is material to which sufficient water has first been applied in a wet screen to render the material dust-free.
20. The primary crushing operation at this facility shall not process more than 2,780,000 tons of material in any 12 consecutive month period, the secondary crushing operation shall not process more than 1,612,400 tons in any 12 consecutive month period and the ''portable'' crushing operation shall not process more than 525,000 tons in any 12 consecutive month period.
21. No material shall be stored in the new oil storage tank which has a vapor pressure equal to or greater than 10.5 kilopascals.
22. The amount of waste oil burned in the Clean Burn Model CB5000 and Model 86BH waste oil furnaces shall not exceed 21,608 and 11,680 gallons, respectively, in any 12 consecutive month period.
23. Following the completion of the construction, installation and modification approved herein, the NOx, CO, SOx, VOCs and PM10 emissions from the entire facility shall not exceed 50.59, 99.91, 88.83, 39.96 and 99.96 tons, respectively, in any 12 consecutive month period.
49-00007B: Merck and Company, Inc. (P. O. Box 600, Danville, PA 17821-0600) for the installation of an air cleaning device, a condenser, on an existing pharmaceutical reaction vessel (EX-2640) in their facility in Riverside Borough, Northumberland County. The respective facility is a major facility for which Title V Operating Permit No. 49-00007 has been issued.
The VOC emissions, a small fraction of which are also HAPs, from the respective vessel are currently controlled by one of two thermal oxidizers (IN-226 or IN-5000). Merck proposes to install a condenser as an alternate air pollution control device for use at times when use of the thermal oxidizers is impossible or inconvenient. When the condenser is in use as the air pollution control device for vessel EX-2640, the resultant VOC and HAP emission rates will be 4.0 pounds and .4 pound per day, respectively.
The Department's review of the information contained in the application indicates that following the installation of the condenser, vessel EX-2640 will comply with all applicable requirements pertaining to air contamination sources and the emission of air contaminants including the best available technology requirements of 25 Pa. Code §§ 127.1 and 127.12 and Subparts GGG and MMM of the National Emission Standards for Hazardous Air Pollutants, 40 CFR 63.1250--63.1261 and 40 CFR 63.1360--63.1369. Based on this finding, the Department intends to approve the application and issue plan approval.
The following is a summary of the conditions the Department proposes to place in the plan approval to be issued to ensure compliance with all applicable regulatory requirements:
1. The air contaminant emissions from pharmaceutical reaction vessel EX-2640 shall be controlled by a 77.04 square foot condenser (CN-2640) unless the emissions are being vented to thermal oxidizer IN-226 or thermal oxidizer IN-5000.
2. The coolant used in condenser CN-2640 shall have a temperature no greater than -20°C and the gas exiting the condenser shall have a temperature no greater than -10°C.
3. The coolant feed line to condenser CN-2640 shall be equipped with instrumentation capable of monitoring and recording the coolant temperature on a continuous basis.
4. The VOC emissions from vessel EX-2640 shall not exceed 1,460 pounds in any 12 consecutive month period following the application of air contaminant emission control and the HAP emissions shall not exceed 146 pounds in any 12 consecutive month period.
5. Vessel EX-2640 and condenser CN-2640 shall comply with all applicable requirements of Subparts GGG and MMM of the National Emission Standards for Hazardous Air Pollutants.
Northwest Region: Air Quality Program, 230 Chestnut Street, Meadville, PA 16335-3481; Contact: Eric Gustafson, Facilities Permitting Chief, (814) 332-6940.
24-131G: SGL Carbon, LLC (900 Theresia Street, St. Marys, PA 15857). In accordance with 25 Pa. Code §§ 127.44(b) and 127.424(b), the Department intends to issue a plan approval for their plant in the Borough of St. Marys, Elk County. The facility currently has a Title V permit which was issued on November 4, 1998. This plan approval will, in accordance with 25 Pa. Code § 127.450, be incorporated into the Title V Operating Permit through an administrative amendment at a later date.
This application is a modification of Permit No. 24131E to change the operating conditions of the scrubbing device for a chemical vapor deposition reactor. Issuance of the plan approval is recommended with the appropriate conditions in the plan approval:
1. The source shall comply with 25 Pa. Code §§ 123.1, 123.31 and 123.41 for fugitive, odor and visible emissions, respectively.
2. Total PM emissions from the source, as measured from the scrubber stack, shall not exceed 0.04 grain/dscf. Compliance with the PM emission limit shall be assumed based on water flow and pressure readings, as defined in condition no. 6 and operation of the source and control device in accordance with manufacturer's specifications and in a manner consistent with good air pollution control practices.
3. The scrubber shall be equipped with inlet water flow and pressure drop gauges. The gauges shall be mounted in easily accessible locations and shall be maintained in good working conditions at all times. Water flow levels and pressure drop shall be maintained in accordance with manufacturer's specifications. Scrubber pressure drop and water flow readings shall be taken daily when the source is in operation.
4. Scrubber water flow shall be maintained at a minimum of 3.5 gallons/minute during all periods of operation.
5. HCl emissions from the source, as measured from the scrubber stack, shall not exceed 0.002 lb/hour, averaged over the reaction period. Compliance with the HCl emission limit shall be assumed based on maintaining the scrubber waterflow rate at a minimum of 3.5 gallons/minute.
6. The permittee shall perform weekly preventative maintenance inspections of the control device and associated equipment.
7. The permittee shall maintain records, at a minimum, of pressure drop and water flow readings and maintenance performed on the control device. The records shall be maintained onsite for a minimum of 5 years and shall be made available to the Department upon request.
8. The permittee shall comply with 25 Pa. Code § 127.25 as follows: no person shall cause or permit the operation of the source unless the source and air cleaning device are operated and maintained in accordance with specifications in the Plan Approval application and Condition Nos. 1--10. A person may not cause or permit the operation of this source in a manner inconsistent with good operating practices.
[Continued on next Web Page]
No part of the information on this site may be reproduced for profit or sold for profit.This material has been drawn directly from the official Pennsylvania Bulletin full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
