[36 Pa.B. 1991]
[Continued from previous Web Page] (d) The qualifying electric utility steam generation unit will be deemed to meet the LAER control technology requirements of § 127.205 (relating to special permit requirements) unless the Department determines that the performance requirements specified in subsection (b) are less stringent than LAER.
(e) The owner or operator of an electric utility steam generation unit meeting the requirements of this section shall offset the net emissions increase of a regulated NSR pollutant in accordance with the offset ratios specified in § 127.210 (relating to offset ratios).
(f) The Department will expedite the processing of a plan approval application for an electric steam generating unit that qualifies under this section.
§ 127.215. Reactivation.
(a) A facility which has been out of operation or production for 1 year or more during the term of its operating permit may be reactivated within the term of its operating permit and will not be considered a new facility subject to this subchapter if the following conditions are satisfied:
(1) The permittee shall within 1 year of the deactivation submit in writing to the Department and implement a maintenance plan which includes the measures to be taken, including maintenance, upkeep, repair or rehabilitation procedures, which will enable the facility to be reactivated in accordance with the terms of the permit.
(2) The permittee shall submit a reactivation plan at least 30 days prior to the proposed date of reactivation. The reactivation plan [shall] must include sufficient measures to ensure that the facility will be reactivated in compliance with the permit requirements. The permittee may submit a reactivation plan to the Department at any time during the term of its operating permit. The reactivation plan may also be submitted to and approved in writing by the Department as part of the plan approval or permit application process.
(3) The permittee shall [submit a notice to] notify the Department in writing within 1 year of deactivation requesting preservation of the emissions in the inventory and indicating the intent to reactivate the facility.
(4) The permittee shall comply with the terms and conditions of the [maintenance] following:
(i) Maintenance plan while the facility is deactivated[, and shall comply with the terms and conditions of the reactivation].
(ii) Reactivation plan and the operating permit upon reactivation.
* * * * * (b) The Department will approve or disapprove in writing the complete reactivation plan within 30 days of plan submission, unless additional time is required based on the size or complexity of the facility.
* * * * * § 127.217. Clean Air Act Titles III--V applicability.
Compliance with this subchapter does not relieve a source or facility from complying with Titles III--V of the Clean Air Act (42 U.S.C.A. §§ 7601--7627; 7641, 7642, 7651--7651o; and 7661--7661f), applicable requirements of the act or regulations adopted under the act.
§ 127.218. PALs.
(a) The following provisions govern an actual PAL for a major facility.
(1) The Department may approve the use of an actual PAL for any existing major facility if the PAL meets the requirements in this subsection through subsection (n).
(2) The Department will not permit an actual PAL for VOC or NOx for a major facility located in an extreme ozone nonattainment area.
(3) A physical change in or change in the method of operation of a major facility that maintains its total facility-wide emissions below the PAL level, meets the requirements in this subsection through subsection (n) and complies with the PAL permit is not:
(i) A major modification for the PAL pollutant.
(ii) Subject to this subchapter.
(iii) Subject to § 127.203(e)(2) (relating to facilities subject to special permitting requirements).
(4) An owner or operator of a major facility shall continue to comply with applicable Federal or State requirements, emissions limitations and work practice requirements that were established prior to the PAL effective date.
(b) The owner or operator of a major facility shall submit the following information to the Department as part of the PAL application:
(1) A list of the emissions units at the facility designated as small, significant or major based on their potential to emit. The list must indicate which Federal or State applicable requirements, emissions limitations or work practices apply to each unit.
(2) Calculations and supporting documentation for the baseline actual emissions, which include emissions associated with operation of the unit, startups and shutdowns.
(3) The calculation procedures that the owner or operator of the major facility proposes to use to convert the monitoring system data to monthly emissions and annual emissions based on a 12-month rolling total for each month as required by subsection (m)(1).
(c) The Department may establish a PAL if the following requirements are met:
(1) The PAL must impose an annual emissions limitation in tpy for the entire major facility. For each month during the PAL effective period after the first 12 months of establishing a PAL, the owner or operator of the major facility shall show that the sum of the monthly emissions from each emissions unit under the PAL for the previous 12 consecutive months, expressed as a 12-month rolling average, is less than the PAL. For each month during the first 11 months from the PAL effective date, the owner or operator of the major facility shall show that the sum of the preceding monthly emissions from the PAL effective date for each emissions unit under the PAL is less than the PAL.
(2) The PAL must be established in a PAL permit that meets the public participation requirements in subsection (d).
(3) The PAL permit must contain all the requirements of subsection (g).
(4) The PAL must include fugitive emissions, to the extent quantifiable, from all emissions units that emit or have the potential to emit the PAL pollutant at the major facility.
(5) Each PAL must regulate emissions of only one pollutant.
(6) Each PAL must have a PAL effective period of 10 years.
(7) The owner or operator of a major facility issued a PAL permit shall comply with the monitoring, recordkeeping and reporting requirements provided in subsections (m)--(o) for each emissions unit under the PAL through the PAL effective period.
(d) At no time during or after the PAL effective period are emissions reductions of a PAL pollutant, which occur during the PAL effective period, creditable as decreases for purposes of offsets under this subchapter unless the level of the PAL is reduced by the amount of the emissions reductions and the reductions would be creditable in the absence of the PAL.
(e) A PAL for an existing major facility must be established or modified in accordance with the public notice procedures set forth under §§ 127.44, 127.424 and 127.521 (relating to public notice; public notice; and additional public participation provisions).
(f) Setting the 10-year actual PAL level must comply with the following:
(1) The actual PAL level for a major facility must be established as the sum of the baseline actual emissions of the PAL pollutant for each emissions unit at the facility plus an amount equal to the applicable emissions rate that is significant for the PAL pollutant or under the Clean Air Act, whichever is lower.
(2) When establishing the actual PAL level, for a PAL pollutant, one consecutive 2-year period must be used to determine the baseline actual emissions for all existing emissions units.
(3) Emissions associated with units that were permanently shut down after this 2-year period must be subtracted from the PAL level.
(4) Emissions from units on which actual construction began after the 2-year period must be added to the PAL level in an amount equal to the actual emissions of the units.
(5) The Department will specify a reduced PAL level in tpy in the PAL permit to become effective on the future compliance date of any applicable Federal or State regulatory requirement that the Department is aware of prior to issuance of the PAL permit.
(g) At a minimum, the PAL permit must contain the following information:
(1) The PAL pollutant and the applicable facility-wide emissions limitation in tpy.
(2) The effective date and the expiration date.
(3) A requirement that if the owner or operator of a major facility applies to renew a PAL in accordance with subsection (i) before the end of the PAL effective period, the PAL permit does not expire at the end of the PAL effective period. The PAL permit remains in effect until the Department issues a revised PAL permit.
(4) A requirement that emission calculations for compliance purposes include emissions from startups, shutdowns and malfunctions.
(5) A requirement that, upon expiration of the PAL permit, the owner or operator of a major facility is subject to the requirements of subsection (j).
(6) The calculation procedures that the owner or operator of a major facility shall use to convert the monitoring system data to monthly emissions and annual emissions based on a 12-month rolling total for each month as required by subsection (n)(1).
(7) A requirement that the owner or operator of a major facility shall monitor all emissions units in accordance with subsection (m).
(8) A requirement that the owner or operator shall retain the records required under subsection (n) onsite.
(9) A requirement that the owner or operator shall submit the reports required under subsection (o) by the required deadlines.
(10) A requirement that the emissions from a new source must be the minimum attainable through the use of BAT.
(11) Other requirements the Department deems necessary to implement and enforce the PAL.
(h) The Department will specify a PAL effective period of 10 years.
(i) The following requirements apply to reopening of the PAL permit:
(1) During the PAL effective period, the Department will reopen the PAL permit to:
(i) Correct typographical/calculation errors made in setting the PAL or reflect a more accurate determination of emissions used to establish the PAL.
(ii) Reduce the PAL if the owner or operator of the major facility creates creditable emissions reductions for use as offsets under § 127.207 (relating to ERC generation or creation).
(iii) Revise the PAL to reflect an increase in the PAL as provided under subsection (l).
(2) The Department may reopen the PAL permit to reduce the PAL:
(i) To reflect newly applicable Federal requirements with compliance dates after the PAL effective date.
(ii) Consistent with a requirement that is enforceable as a practical matter and that the State may impose on the major facility consistent with all applicable requirements.
(iii) If the Department determines that a reduction is necessary to avoid causing or contributing to:
(A) A NAAQS or PSD increment violation.
(B) An adverse impact on an air quality related value that has been identified for a Federal Class I area by a Federal land manager and for which information is available to the general public.
(3) Except for the permit reopening paragraph (1)(i) for the correction of typographical/calculation errors that do not increase the PAL level, other reopenings shall be carried out in accordance with the public participation requirements of subsection (e).
(j) A PAL permit which is not renewed in accordance with the procedures in subsection (k) expires at the end of the PAL effective period and the following requirements apply:
(1) The owner or operator of each emissions unit or each group of emissions units that existed under the PAL shall comply with an allowable emissions limitation under a revised permit established according to the following procedures:
(i) Within the time frame specified for PAL permit renewals in subsection (k)(2), the owner or operator of the major facility shall submit a proposed allowable emissions limitation for each emissions unit, or each group of emissions units if this distribution is more appropriate as decided by the Department, by distributing the PAL allowable emissions for the major facility among each of the emissions units that existed under the PAL permit. If the PAL permit has not been adjusted for an applicable requirement that became effective during the PAL effective period, as required under subsection (k)(5), this distribution is made as if the PAL permit has been adjusted.
(ii) The Department will decide whether and how to distribute the PAL allowable emissions and issue a revised permit incorporating allowable limits for each emissions unit or each group of emissions units.
(2) The owner or operator of each emissions unit or group of emissions units shall comply with the allowable emissions limitation on a 12-month rolling basis. The Department may approve the use of emissions monitoring systems other than CEMS, CERMS, PEMS or CPMS to demonstrate compliance with the allowable emissions limitation.
(3) Until the Department issues the revised PAL permit incorporating the allowable limits for each emissions unit or group of emissions units required under paragraph (1)(i), the owner or operator of the facility shall continue to comply with a facility-wide, multi-unit emissions cap equivalent to the level of the PAL emissions limitation.
(4) A physical change or change in the method of operation at the major facility is subject to this subchapter if the change meets the definition of major modification.
(5) The owner or operator of the major facility shall continue to comply with any State or Federal applicable requirements including BAT, BACT, RACT or NSPS that may have applied either during the PAL effective period or prior to the PAL effective period except for those emissions limitations that had been established under § 127.203(e), but were eliminated by the PAL in accordance with the provisions in subsection (a)(3)(iii).
(k) The following requirements apply to renewal of a PAL:
(1) The Department will follow the procedures specified in subsection (e) in approving a request to renew a PAL permit for a major facility, and will provide both the proposed PAL level and a written rationale for the proposed PAL level to the public for review and comment in accordance with the public notice requirements in § 127.44. During the public review, a person may propose a PAL level for the major facility for consideration by the Department.
(2) An owner or operator of a major facility shall submit a timely application to the Department to request renewal of a PAL permit. A timely application is one that is submitted at least 6 months, prior to, but not earlier than 18 months prior to the date of permit expiration. If the owner or operator of a major facility submits a complete application to renew the PAL permit within this time period, then the PAL continues to be effective until the revised permit with the renewed PAL is issued.
(3) The application to renew a PAL permit must contain the following information:
(i) The information required in subsection (b)(1)--(3).
(ii) A proposed PAL level.
(iii) The sum of the potentials to emit of the emissions units under the PAL.
(iv) Other information the owner or operator wishes the Department to consider in determining the appropriate level at which to renew the PAL.
(4) The Department will consider the options in subparagraphs (i) and (ii) in determining whether and how to adjust the PAL. In no case may the adjustment fail to comply with subparagraphs (iii) and (iv).
(i) If the emissions level calculated in accordance with subsection (f) is equal to or greater than 80% of the PAL level, the Department may renew the PAL at the same level without considering the factors set forth in subparagraph (ii).
(ii) The Department may set the PAL at a level that it determines to be more representative of the facility's baseline actual emissions or that it determines to be appropriate considering air quality needs, advances in control technology, anticipated economic growth in the area, desire to reward or encourage the facility's voluntary emissions reductions or other factors specifically identified by the Department in its written rationale.
(iii) If the potential to emit of the major facility is less than the PAL, the Department will adjust the PAL to a level no greater than the potential to emit of the facility.
(iv) The Department will not approve a renewed PAL level higher than the current PAL unless the major facility has complied with subsection (l).
(5) If the compliance date for a State or Federal requirement that applies to the facility occurs during the PAL effective period and the Department has not already adjusted for this requirement, the PAL must be adjusted at the time of the PAL permit renewal or Title V permit renewal, whichever occurs first.
(l) The following requirements apply to increasing a PAL during the PAL effective period:
(1) The Department may increase a PAL emissions limitation during the PAL effective period if the owner or operator of the major facility complies with the following:
(i) The owner or operator of the major facility shall submit a complete application to request an increase in the PAL limit for a PAL major modification. The application must identify the emissions units contributing to the increase in emissions that cause the major facility's emissions to equal or exceed its PAL.
(ii) The owner or operator of the major facility shall demonstrate that the sum of the baseline actual emissions of the small emissions units, plus the sum of the baseline actual emissions of the significant and major emissions units assuming application of BACT equivalent controls, plus the sum of the allowable emissions of the new or modified emissions units exceeds the PAL. The level of control that would result from BACT equivalent controls on each significant or major emissions unit must be determined by conducting a new BACT analysis at the time the application is submitted unless the emissions unit is currently required to comply with a BACT or LAER requirement that was established within the preceding 10 years. In this case, the assumed control level for that emissions unit is equal to the level of BACT or LAER with which that emissions unit must currently comply.
(iii) The owner or operator of the major facility shall obtain a major NSR permit for all emissions units identified in subparagraph (i), regardless of the magnitude of the emissions increase resulting from them. The owner or operator of these emissions units shall comply with the applicable emissions requirements of this subchapter, even if the units are subject to a PAL or continue to be subject to a PAL.
(iv) The PAL permit must require that the increased PAL level be effective on the day any emissions unit that is part of the PAL major modification becomes operational and begins to emit the PAL pollutant.
(2) The Department will calculate the new PAL as the sum of the allowable emissions for each modified or new emissions unit, plus the sum of the baseline actual emissions of the significant and major emissions units assuming application of BACT equivalent controls determined in accordance with paragraph (1)(ii), plus the sum of the baseline actual emissions of the small emissions units.
(3) The PAL permit must be revised to reflect the increased PAL level under the public notice requirements of subsection (e).
(m) The following monitoring requirements apply to an owner or operator subject to a PAL:
(1) Each PAL permit must contain enforceable requirements for the monitoring system to accurately determine plantwide emissions of the PAL pollutant in terms of mass per unit of time.
(2) The PAL monitoring system must employ one or more of the four general monitoring approaches meeting the minimum requirements in paragraph (5) and must be approved in writing by the Department.
(3) The owner or operator of the facility may also use an alternative monitoring approach that meets the requirements of paragraph (1), if approved in writing by the Department.
(4) Failure to use a monitoring system that meets the requirements of this section renders the PAL permit invalid.
(5) The following are acceptable general monitoring approaches when conducted in accordance with the minimum requirements in paragraphs (6)--(12):
(i) Mass balance calculations for activities using coatings or solvents.
(ii) CEMS.
(iii) CPMS or PEMS.
(iv) Emission factors.
(6) An owner or operator of a major facility using mass balance calculations to monitor PAL pollutant emissions from activities using coating or solvents shall meet the following requirements:
(i) Provide a demonstrated means of validating the published content of the PAL pollutant that is contained in or created by all materials used in or at the emissions unit.
(ii) Assume that the emissions unit emits all of the PAL pollutant that is contained in or created by any raw material or fuel used in or at the emissions unit, if it cannot otherwise be accounted for in the process.
(iii) If the vendor of a material or fuel used in or at the emissions unit publishes a range of pollutant content from the material, the owner or operator shall use the highest value of the range to calculate the PAL pollutant emissions unless the Department determines, in writing, that there is site-specific data or a site-specific monitoring program to support another content within the range.
(7) An owner or operator of a major facility using a CEMS to monitor PAL pollutant emissions shall meet the following requirements:
(i) The CEMS must comply with applicable Performance Specifications found in 40 CFR Part 60, Appendix B (relating to performance specifications).
(ii) The CEMS must sample, analyze and record data at least every 15 minutes while the emissions unit is operating.
(8) An owner or operator of a major facility using a CPMS or PEMS to monitor PAL pollutant emissions shall meet the following requirements:
(i) The CPMS or PEMS must be calibrated based on current site-specific data demonstrating a correlation between the monitored parameters and the PAL pollutant emissions across the range of operation of the emissions unit.
(ii) Each CPMS or PEMS must sample, analyze and record data at least every 15 minutes or other less frequent interval approved in writing by the Department, while the emissions unit is operating.
(9) An owner or operator of a major facility using emission factors to monitor PAL pollutant emissions shall:
(i) Adjust the emission factors to account for the degree of uncertainty or limitations in the development of the factors.
(ii) Operate the emissions unit within the designated range of use for the emission factor, if applicable.
(iii) Conduct validation testing to determine a site-specific emission factor within 6 months of PAL permit issuance, unless the Department determines, in writing, that testing is not required.
(10) An owner or operator of a facility shall record and report maximum potential emissions without considering enforceable emissions limitations or operational restrictions for an emissions unit during a period of time that there is no monitoring data, unless another method for determining emissions during these periods is specified in the PAL permit.
(11) If an owner or operator of an emissions unit cannot demonstrate a correlation between the monitored parameters and the PAL pollutant emissions rate at the operating points of the emissions unit, the Department will, at the time of permit issuance, either:
(i) Establish default values for determining compliance with the PAL permit based on the highest potential emissions reasonably estimated at the operating points.
(ii) Determine that operation of the emissions unit during operating conditions when there is no correlation between monitored parameters and the PAL pollutant emissions is a violation of the PAL permit.
(12) Data used to establish the PAL must be revalidated through performance testing or other scientifically valid means approved in writing by the Department. This testing must occur at least once every 5 years after issuance of the PAL permit.
(n) The following requirements apply to recordkeeping:
(1) The PAL permit must require an owner or operator to retain a copy of all records necessary to determine compliance with a requirement of this section and of the PAL, including a determination of the 12-month rolling total emissions for each emissions unit, for 5 years.
(2) The PAL permit must require an owner or operator to retain a copy of the following records for the duration of the PAL effective period and 5 years after the PAL permit expires:
(i) A copy of the PAL permit application and applications for revisions to the PAL permit.
(ii) Each annual certification of compliance required under Title V of the Clean Air Act (42 U.S.C.A. §§ 7661--7661f) and regulations adopted under the act and the data relied on in certifying the compliance.
(o) The following requirements apply to reporting and notification:
(1) The owner or operator of a major facility shall submit semiannual monitoring reports and prompt deviation reports to the Department in accordance with the Title V operating permit requirements of Chapter 127, Subchapters F and G (relating to operating permit requirements; and Title V operating permits).
(2) The semiannual reports must:
(i) Be submitted to the Department within 30 days of the end of each reporting period.
(ii) Contain the following information:
(A) The identification of the owner and operator and the permit number.
(B) Total annual emissions in tpy based on a 12-month rolling total for each month in the reporting period recorded in compliance with subsection (n)(1).
(C) Data relied upon, including the quality assurance or quality control data, in calculating the monthly and annual PAL pollutant emissions.
(D) A list of the emissions units modified or added to the major facility during the preceding 6-month period.
(E) The number, duration and cause of deviations or monitoring malfunctions, other than the time associated with zero and span calibration checks, and the corrective action taken.
(F) A notification of a shutdown of a monitoring system, whether the shutdown was permanent or temporary, the reason for the shutdown, the anticipated date that the monitoring system will be fully operational or replaced with another monitoring system, whether the emissions unit monitored by the monitoring system continued to operate, and the calculation of the emissions of the pollutant or the number determined by the method included in the permit under subsection (m)(10).
(G) A compliance certification signed by a responsible official of the company that owns or operates the facility. In addition to the certification requirements of this section, the certification must state that, based on information and belief formed after reasonable inquiry, the statements and information in the document are true, accurate and complete.
(3) The reports of deviations and exceedances of the PAL requirements, including periods in which no monitoring is available, must:
(i) Be submitted to the Department promptly. A report submitted under Subchapter G (relating to Title V operation permits) satisfies this reporting requirement.
(ii) Contain the following information:
(A) The identification of the owner and operator and the permit number.
(B) The PAL requirement that experienced the deviation or that was exceeded.
(C) Emissions resulting from the deviation or the exceedance.
(D) A compliance certification signed by a responsible official of the company that owns or operates the facility. In addition to the certification requirements of this section, the certification must state that, based on information and belief formed after reasonable inquiry, the statements and information in the document are true, accurate and complete.
(4) The owner or operator of a major facility shall submit to the Department the results of any revalidation test or method within 3 months after completion of the test or method.
(p) The Department may modify or supersede any PAL which was established prior to the date of approval of the PAL provisions by the EPA as a revision to the SIP.
[Pa.B. Doc. No. 06-701. Filed for public inspection April 28, 2006, 9:00 a.m.]
No part of the information on this site may be reproduced for profit or sold for profit.This material has been drawn directly from the official Pennsylvania Bulletin full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
