[37 Pa.B. 1662]
[Saturday, April 14, 2007]
[Continued from previous Web Page] 200. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of SOx, expressed as SO2, from each fire pump engine shall not exceed 0.12 gram per brake horsepower-hour and 0.03 ton in any 12-consecutive month period.
201. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the New Source Review provisions of 25 Pa. Code §§ 127.201--127.217 and the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of NOx, expressed as NO2, from each fire pump engine shall not exceed 5.23 grams per brake horsepower-hour and 1.04 tons in any 12-consecutive month period.
202. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of CO from each fire pump engine shall not exceed 0.81 grams per brake horsepower-hour and 0.16 tons in any 12-consecutive month period.
203. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of PM from each fire pump engine shall not exceed 0.2 gram per brake horsepower-hour and 0.04 ton in any 12-consecutive month period.
204. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of PM10 from each fire pump engine shall not exceed 0.2 gram per brake horsepower-hour and 0.04 ton in any 12-consecutive month period.
205. Under the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of nonmethane hydrocarbons from each fire pump engine shall not exceed 0.2 gram per brake horsepower-hour and 0.04 ton in any 12-consecutive month period.
206. Under the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of HAPs from each fire pump engine shall not exceed 1.74 pounds in any 12-consecutive month period.
207. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the visible air contaminant emissions from each fire pump engine shall not equal or exceed 10% opacity for a period or periods aggregating more than 3 minutes in any 1 hour or equal or exceed 30% opacity at any time.
208. The permittee shall maintain comprehensive accurate records for the fire pump engines which shall be adequate to allow compliance to be determined with the requirements contained in all conditions contained herein. At a minimum, these records shall include:
a. The type and amount (gallons) of fuel used in the fire pump engines each month.
b. The number of hours that each fire pump engine operates each month.
All records generated under this condition shall be retained for at least 5 years and shall be made available to the Department upon request.
209. The permittee shall submit reports to the Department on a semi-annual basis that include:
a. The type and amount (gallons) of fuel used in the fire pump engines during the prior 6-consecutive month period.
b. The number of hours that each fire pump engine operates during the prior 6-consecutive month period.
The semi-annual reports shall be submitted to the Department by no later than September 1 of each year (containing the records generated for the immediately-preceding January through June 6-month period) and March 1 of each year (containing the records generated for the immediately-preceding July through December 6-month period).
210. The two fire pump engines are subject to Subpart IIII of the Federal New Source Performance Standards, 40 CFR 60.4200--60.4219. The permittee shall comply with all applicable requirements of this Subpart as well as any other applicable Subpart of the Standards of Performance, including all recordkeeping and reporting requirements. Under 40 CFR 60.4 of the Standards of Performance, the submission of all requests, reports, applications, submittals and other communications required by the Standards of Performance must be made to both the Department of Environmental Protection and the Environmental Protection Agency. The Environmental Protection Agency copies may be sent to:
U. S. EPA Region III
Air Protection Division
Office of Enforcement and Permits (3AP10)
1650 Arch Street
Philadelphia, PA 19103
and
The Pennsylvania Department of Environmental
Protection
Air Quality Program Manager
208 W. Third Street, Suite 101
Williamsport, PA 17701-6448211. Within 30 days of selection of the specific fire pump engines the permittee proposes to install, the permittee shall notify the Department of the manufacturer and model of the fire pump engines selected and shall additionally, at the same time, submit to the Department for review specifications for the fire pump engines that are comprehensive enough to allow the Department to determine if the selected fire pump engines are equivalent to those proposed in the plan approval application.
212. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of PM from the cogeneration plant cooling tower shall not exceed 0.573 pound per hour and 2.51 tons in any 12-consecutive month period.
213. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of PM10 from the cogeneration plant cooling tower shall not exceed 0.573 pound per hour and 2.51 tons in any 12-consecutive month period.
214. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of PM from the ethanol plant cooling tower shall not exceed 0.83 pound per hour and 3.61 tons in any 12-consecutive month period.
215. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of PM10 from the ethanol plant cooling tower shall not exceed 0.83 pound per hour and 3.61 tons in any 12-consecutive month period.
216. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of PM from the evaporative condenser shall not exceed 0.086 pound per hour and 0.376 ton in any 12-consecutive month period.
217. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the emission of PM10 from the evaporative condenser shall not exceed 0.086 pound per hour and 0.376 ton in any 12-consecutive month period.
218. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, each cell of the cogeneration plant cooling tower, the ethanol plant cooling tower and the evaporative condenser shall be equipped with a drift eliminator.
219. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the drift eliminator on each cell of the cogeneration plant cooling tower, the ethanol plant cooling tower and the evaporative condenser shall be capable of achieving a maximum drift rate of 0.005%.
220. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the cogeneration plant cooling tower shall be a factory-assembled, mechanical draft two cell cooling tower which shall not exceed a circulating water flow rate of 960,000 gallons per hour at any time and the total dissolved solids concentration of the cooling tower's circulating water shall not exceed 1,433 ppm at any time.
221. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the ethanol plant cooling tower shall be a factory-assembled, mechanical draft eight cell cooling tower which shall not exceed a circulating water flow rate of 1,800,000 gallons per hour at any time and the total dissolved solids concentration of the cooling tower's circulating water shall not exceed 1,100 ppm at any time.
222. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the evaporative condenser shall have six cells and shall not exceed a circulating water flow rate of 144,000 gallons per hour at any time and the total dissolved solids concentration of the circulating water shall not exceed 1,433 ppm at any time.
223. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the permittee shall continuously monitor the circulating water flow rate, the total dissolved solids content of the make-up water and the number of cycles of concentration in the cogeneration plant cooling tower, the ethanol plant cooling tower and the evaporative condenser.
224. The permittee shall maintain comprehensive accurate records for the cogeneration plant cooling tower, the ethanol plant cooling tower and the evaporative condenser which shall be adequate to allow compliance to be determined with the requirements contained in all conditions contained herein. At a minimum, these records shall include the circulating water flow rate, the total dissolved solids content of the make-up water and the number of cycles of concentration on a continuous basis as well as the calculated PM and PM10 emission rates, all associated calculations and all supporting data (to be used to verify compliance with the PM and PM10 emission limitations contained herein). All records generated under this condition shall be retained for at least 5 years and shall be made available to the Department upon request.
225. The permittee shall submit reports to the Department on a semi-annual basis that include the calculated PM and PM10 emission rates which occurred during the prior 6-consecutive month period, all associated calculations and all supporting data. The semi-annual reports shall be submitted to the Department by no later than September 1 of each year (containing the records generated for the immediately-preceding January through June 6-month period) and March 1 of each year (containing the records generated for the immediately-preceding July through December 6-month period).
226. Within 30 days of selection of the specific cooling towers and evaporative condenser the permittee proposes to install, the permittee shall notify the Department of the manufacturer and model of the cooling towers and evaporative condenser selected and shall additionally, at the same time, submit to the Department for review specifications for the cooling towers and evaporative condenser that are comprehensive enough to allow the Department to determine if the selected cooling towers and evaporative condenser are equivalent to those proposed in the plan approval application.
227. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, all railcar deliveries of waste coal shall be emptied into a fully enclosed bunker which shall be under negative pressure and controlled by a fabric collector at all times that waste coal is being received, transferred or stored within the building. Additionally, all of the building's potential openings shall be closed during unloading operations and PM collection points shall be placed within the building adjacent to all locations where waste coal enters. Within 30 days of the selection of the specific collector the permittee proposes to install, the permittee shall notify the Department of the manufacturer and model of the specific collector selected and shall additionally, at the same time, submit to the Department for review specifications for the collector that are comprehensive enough to allow the Department to determine if the selected collector is equivalent to that proposed in the plan approval application.
228. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the waste coal bunker fabric collector shall capture, at a minimum, 80% of the PM and PM10 emissions generated from the waste coal railcar unloading operations.
229. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the waste coal bunker fabric collector shall have an effective air-to-cloth ratio under actual conditions of no more than 8:1 and the collector bags shall be cleaned using reverse air jets.
230. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the PM emissions from the waste coal bunker fabric collector shall not exceed of 0.005 grain per dry standard cubic foot of effluent gas volume, 0.43 pound per hour and 1.88 tons in any 12-consecutive month period and the PM10 emissions shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.43 pound per hour and 1.88 tons in any 12-consecutive month period. Additionally, there shall be no visible emissions from the fabric collector (other than water vapor or steam).
231. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the fugitive PM emissions from the waste coal unloading activities shall not exceed 0.023 ton in any 12-consecutive month period and the fugitive PM10 emissions shall not exceed 0.008 ton in any 12-consecutive month period.
232. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the two conveyors transporting waste coal shall be fully enclosed, except for where waste coal enters and exits the conveyor, unless a portion of the conveyor is completely inside a fully enclosed building.
233. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the waste coal screen and crusher shall be located inside the fully enclosed waste coal screening and crushing building which shall be controlled by a fabric collector at all times that waste coal is being screened and crushed within the building. Additionally, all of the building's potential openings shall be closed during crushing and screening operations. Within 30 days of the selection of the specific collector the permittee proposes to install, the permittee shall notify the Department of the manufacturer and model of the specific collector selected and shall additionally, at the same time, submit to the Department for review specifications for the collector that are comprehensive enough to allow the Department to determine if the selected collector is equivalent to that proposed in the plan approval application.
234. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the waste coal screening and crushing building fabric collector shall have an effective air-to-cloth ratio under actual conditions of no more than 8:1 and the collector bags shall be cleaned using reverse air jets.
235. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the PM emissions from the waste coal screening and crushing building fabric collector shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.214 pound per hour and 0.94 ton in any 12-consecutive month period and the PM10 emissions shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.214 pound per hour and 0.94 ton in any 12-consecutive month period. Additionally, there shall be no visible emissions from the fabric collector (other than water vapor or steam).
236. Within 30 days of selection of the specific waste coal crusher, screen and conveyors the permittee proposes to install, the permittee shall notify the Department of the manufacturer and model of the waste coal crusher and screen selected as well as the width and length of each conveyor, number of screen decks, the dimensions of the screen decks and the type of crusher and shall additionally, at the same time, submit to the Department for review specifications for the waste coal crusher and screen that are comprehensive enough to allow the Department to determine if the selected waste coal crusher and screen are equivalent to those proposed in the plan approval application.
237. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the four waste coal day bins and 120 ton per hour transfer conveyor shall be located inside the fully enclosed boiler house building which shall be controlled by a fabric collector at all times that waste coal is being received, transferred or stored within the building. Additionally, all of the building's potential openings shall be closed during the transferring and storage operations. Within 30 days of the selection of the specific collector the permittee proposes to install, the permittee shall notify the Department of the manufacturer and model of the specific collector selected and shall additionally, at the same time, submit to the Department for review specifications for the collector that are comprehensive enough to allow the Department to determine if the selected collector is equivalent to that proposed in the plan approval application.
238. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the boiler house building fabric collector shall have an effective air-to-cloth ratio under actual conditions of no more than 8:1 and the collector bags shall be cleaned using reverse air jets.
239. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the PM emissions from the boiler house fabric collector shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.3 pound per hour and 1.32 tons in any 12-consecutive month period and the PM10 emissions shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.3 pound per hour and 1.32 tons in any 12-consecutive month period. Additionally, there shall be no visible emissions from the fabric collector (other than water vapor or steam).
240. The waste coal processing, conveying and storage systems are subject to Subpart Y of the Federal New Source Performance Standards, 40 CFR 60.250--60.254. The permittee shall comply with all applicable requirements of this Subpart as well as any other applicable Subpart of the Standards of Performance, including all recordkeeping and reporting requirements. Under 40 CFR 60.4 of the Standards of Performance, the submission of all requests, reports, applications, submittals and other communications required by the Standards of Performance must be made to both the Department of Environmental Protection and the Environmental Protection Agency. The Environmental Protection Agency copies may be sent to:
U. S. EPA Region III
Air Protection Division
Office of Enforcement and Permits (3AP10)
1650 Arch Street
Philadelphia, PA 19103
and
The Pennsylvania Department of Environmental
Protection
Air Quality Program Manager
208 W. Third Street, Suite 101
Williamsport, PA 17701-6448241. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, all truck deliveries of limestone to the facility shall be pneumatically conveyed to a 1,200 ton capacity limestone storage silo which shall be controlled by a fabric collector at all times that limestone is being transferred to the silo. Within 30 days of the selection of the specific collector the permittee proposes to install, the permittee shall notify the Department of the manufacturer and model of the specific collector selected and shall additionally, at the same time, submit to the Department for review specifications for the collector that are comprehensive enough to allow the Department to determine if the selected collector is equivalent to that proposed in the plan approval application.
242. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the limestone storage silo fabric collector shall have an effective air-to-cloth ratio under actual conditions of no more than 8:1 and the collector bags shall be cleaned using reverse air jets.
243. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the facility shall receive no more than 81,380 tons of limestone in any 12-consecutive month period. Records shall be maintained of the amount of limestone received during each month. All records generated under this condition shall be retained for at least 5 years and shall be made available to the Department upon request.
244. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the permittee shall submit semi-annual reports to the Department listing the amount of limestone received at the facility during each month of the respective reporting period. Each semi-annual report shall be submitted to the Department by no later than September 1 (for the immediately-preceding January 1 through June 30 period) and March 1 (for the immediately-preceding July 1 through December 31 period).
245. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the PM emissions from the limestone storage silo fabric collector shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.07 pound per hour and 0.31 ton in any 12-consecutive month period and the PM10 emissions shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.07 pound per hour and 0.31 ton in any 12-consecutive month period. Additionally, there shall be no visible emissions from the fabric collector (other than water vapor or steam).
246. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the two 224 ton capacity limestone day bins shall be located within the fully enclosed boiler house building. The PM emissions from the two bins shall be controlled by a fabric collector at all times that limestone is being received, transferred or stored within the boiler house building. Within 30 days of the selection of the specific collector the permittee proposes to install, the permittee shall notify the Department of the manufacturer and model of the specific collector selected and shall additionally, at the same time, submit to the Department for review specifications for the collector that are comprehensive enough to allow the Department to determine if the selected collector is equivalent to that proposed in the plan approval application.
247. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the limestone day bin fabric collector shall have an effective air-to-cloth ratio under actual conditions of no more than 8:1 and the collector bags shall be cleaned using reverse air jets.
248. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the PM emissions from the limestone day bin fabric collector shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.05 pound per hour and 0.22 ton in any 12-consecutive month period and the PM10 emissions shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.05 pound per hour and 0.22 ton in any 12-consecutive month period. Additionally, there shall be no visible emissions from the fabric collector (other than water vapor or steam).
249. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, all ash shall be pneumatically conveyed by means of vacuum to a 2,000 ton capacity ash storage silo which shall be controlled by a fabric collector at all times that ash is being transferred to the silo. Within 30 days of the selection of the specific collector the permittee proposes to install, the permittee shall notify the Department of the manufacturer and model of the specific collector selected and shall additionally, at the same time, submit to the Department for review specifications for the collector that are comprehensive enough to allow the Department to determine if the selected collector is equivalent to that proposed in the plan approval application.
250. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the ash storage silo fabric collector shall have an effective air-to-cloth ratio under actual conditions of no more than 8:1 and the collector bags shall be cleaned using reverse air jets.
251. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the PM emissions from the ash storage silo fabric collector shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.195 pound per hour and 0.86 ton in any 12-consecutive month period and the PM10 emissions shall not exceed 0.005 grain per dry standard cubic foot of effluent gas volume, 0.195 pound per hour and 0.86 ton in any 12-consecutive month period. Additionally, there shall be no visible emissions from the fabric collector (other than water vapor or steam).
252. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the facility shall remove no more than 195,884 tons of ash in any 12-consecutive month period. Records shall be maintained of the amount of ash removed during each month. All records generated under this condition shall be retained for at least 5 years and shall be made available to the Department upon request.
253. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the permittee shall submit semi-annual reports to the Department listing the amount of ash removed from the facility during each month of the respective reporting period. Each semi-annual report shall be submitted to the Department by no later than September 1 (for the immediately-preceding January 1 through June 30 period) and March 1 (for the immediately-preceding July 1 through December 31 period).
254. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, all ash shall be sufficiently conditioned with water in a pug mill prior to the loading of the ash into trucks in order to prevent fugitive emissions from occurring.
255. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the ash hoppers, pug mill and associated water supply lines shall be heated with an electrical or steam heat tracing system.
256. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, an extending ash discharge spout shall be used during all ash loadouts into trucks in order to minimize the drop height.
257. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, all trucks containing ash shall be covered to prevent fugitive air contaminant emissions from occurring.
258. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, all No. 2 fuel oil and diesel fuel burned in any source at this facility shall be virgin fuel to which no reclaimed or reprocessed oil or other waste materials have been added. Additionally, the sulfur content of the No. 2 fuel oil and diesel fuel shall not, at any time, exceed 0.05% (by weight).
259. The permittee shall sample and analyze each delivery of No. 2 fuel oil and diesel fuel to determine its sulfur content or shall obtain a fuel certification report from the fuel supplier for each delivery which identifies and certifies its sulfur content.
260. The permittee shall keep records of the No. 2 fuel oil/diesel fuel analyses and/or fuel certification reports used to verify compliance with the % sulfur limitation for the No. 2 fuel oil and diesel fuel. These records shall be retained for a minimum of 5 years and shall be made available to the Department upon request.
261. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, each fabric collector at the facility shall be equipped with instrumentation to continuously monitor the pressure drop across the fabric collector. The CFB boiler fabric collector shall also have instrumentation to continuously monitor the inlet flue gas temperature.
262. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, a sufficient quantity of spare fabric bags for each fabric collector at the facility shall be kept on hand at all times in order to immediately replace any worn or damaged bags due to deterioration resulting from routine operation of any of the fabric collectors.
263. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the air compressor(s) supplying the compressed air for the fabric collectors at the facility shall be equipped with an air dryer and oil trap.
264. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, weekly visible air contaminant emissions observations, weekly differential pressure readings and semi-annual Method 9 tests shall be performed on the grain receiving fabric collector, two corn bin fabric collectors, surge bin fabric collector, hammermill fabric collector, DDGS loadout fabric collector, waste coal bunker fabric collector, waste coal screening and crushing building fabric collector, boiler house building fabric collector, limestone storage silo fabric collector, limestone day bin fabric collector and ash storage silo fabric collector. All observations and testing performed on a collector shall be conducted while the source being controlled by the respective fabric collector is actually in operation (such as storage silos must actually be in the process of being filled, and the like). If, during the performance of any of the visible air contaminant emission observations or Method 9 tests, any opacity in excess of 0% is observed (other than that associated with water vapor or steam), the respective collector shall be inspected, the cause of the excess opacity determined and all necessary repairs performed. The results from each weekly visible emission observation, each weekly reading of the differential pressure across each fabric collector and each semi-annual Method 9 test shall be recorded as shall any occurrences of collector inspection and repair which result from the observations and tests. These records shall be retained for a minimum of 5 years and shall be made available to the Department upon request.
265. The permittee shall submit reports to the Department on a semi-annual basis that include:
a. The identity of each fabric collector which had a visible air contaminant emission observation in excess of 0% during the prior 6-consecutive month period as well as the date and time of each such observation.
b. The results of the collector inspection and the nature of any repairs performed, for each occurrence of observed opacity in excess of 0% for each fabric collector during the prior 6-consecutive month period.
The semi-annual reports shall be submitted to the Department by no later than September 1 of each year (containing the records generated for the immediately-preceding January through June 6-month period) and March 1 of each year (containing the records generated for the immediately-preceding July through December, 6-month period).
266. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, an operable vacuum-type road sweeper shall be maintained onsite at all times and shall be used, as needed, to remove dust from roadways. The use of nonvacuum type road sweepers is prohibited.
267. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, all facility roadways shall be paved and properly maintained.
268. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, as well as the BAT provision of 25 Pa. Code §§ 127.1 and 127.12, the facility shall establish and enforce, a vehicle speed limit of no higher than 10 miles per hour on all plant roadways. This speed limit shall be posted in highly visible locations along the respective roadways.
269. At least 60 days prior to the performance of any stack testing or portable emissions analyzer testing required by condition 16, 31, 57, 58, 105, 155, 180, 192 herein, three copies of a test plan or protocol shall be submitted to the Department for evaluation. The protocol shall describe the test methods and procedures to be used in the performance of testing and shall include dimensioned sketches of the exhaust systems showing the locations of all proposed sampling ports. The protocol shall also identify all process data which will be monitored and recorded during testing.
270. The Department shall be given at least 10 days advance notice of the scheduled dates for the performance of any stack testing or portable emissions analyzer testing required by condition 16, 31, 57, 58, 105, 155, 180, 192 herein. The Department is under no obligation to accept the results of any testing performed without proper notification having been given.
271. Within 60 days of the completion of any stack testing or portable emissions analyzer testing required by condition 16, 31, 57, 58, 105, 155, 180, 192 herein, three copies of a test report shall be submitted to the Department. This test report shall contain the results of the testing, a description of the test methods and procedures actually used in the performance of the tests, copies of all process data collected during the testing, copies of all raw test data and copies of all calculations generated during data analysis. The results of the testing shall be expressed in units which allow for a direct comparison and determination of compliance, with the air contaminant emission limitations contained herein.
272. Under the New Source Review provisions of 25 Pa. Code §§ 127.201--127.217, the permittee shall have in their possession 196.65 tons of NOx emission reduction credits (ERCs) prior to the start of operation of any source at the facility and shall demonstrate this to the Department's satisfaction.
273. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, the construction of this facility shall not result in the consumption of more than 10.2 µg/m2 of the allowable 25 µg/m3 annual NOx increment, 28.2 µg/m3 of the allowable 30 µg/m3 24-hour PM10 increment, 6.2 µg/m3 of the allowable 17 µg/m3 annual PM10 increment, 275.9 µg/m3 of the allowable 512 µg/m3 3-hour SO2 increment, 74.4 µg/m3 of the allowable 91 µg/m3 24-hour SO2 increment and 13.9 µg/m3 of the allowable 20 µg/m3 annual SO2 increment at this site.
274. Under the Prevention of Significant Deterioration provisions in 40 CFR 52.21 and 25 Pa. Code § 127.83, the permittee shall install a fence and gates to enclose all areas within the ambient air boundary as shown in Figures 3-1 of the plan approval application modeling analysis report. Fencing and gates shall also border the railroad line which passes through the facility. The fence shall be at a minimum three-wire, barbed or smooth, the top wire at a height of no less than 4 feet and constructed such that an adult person cannot easily step through. The fence shall have signs spaced at intervals no greater than 100 yards, with the message ''No Trespassing''. Lockable gates shall be installed at any place where access through the fence is needed. Video cameras shall be installed, viewing gates at all plant entrances. These gates shall be viewable on monitors installed in the plant's main control room.
275. The issuance of an operating permit for this facility is contingent upon all sources being constructed, all air cleaning devices being installed and all sources and air cleaning devices subsequently being maintained and operated, as described in the plan approval and supplemental materials submitted for this application and in accordance with all conditions contained herein and upon satisfactory demonstration that any air contaminant emissions are in compliance with all limitations specified herein, as well as in compliance with all requirements specified in, or established pursuant to, all applicable rules and regulations contained in 25 Pa. Code Chapters 121--145 and all applicable requirements specified in, or established pursuant to, the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and 25 Pa. Code § 127.83, Subpart Dc of the Federal Standards of Performance for New Stationary Sources 40 CFR 60.40c--60.48c, Subpart Db of the Federal Standards of Performance for New Stationary Sources 40 CFR 60.40b--60.49b, Subpart IIII of the Federal Standards of Performance for New Stationary Sources 40 CFR 60.4200--60.4219, Subpart Y of the Federal Standards of Performance for New Stationary Sources 40 CFR 60.250--60.254, Subpart Kb of the Federal Standards of Performance for New Stationary Sources 40 CFR 60.110b--60.117b and Subpart VV of the Federal Standards of Performance for New Stationary Sources, 40 CFR 60.480--60.489.
276. The permittee shall report malfunctions to the Department which occur at this facility.
a. As defined in 40 CFR § 60.2 and incorporated by reference in 25 Pa. Code Chapter 122, a malfunction is any sudden, infrequent and not reasonably preventable failure of air pollution control equipment, process equipment, or a process to operate in a normal or usual manner. Failures that are caused in part by poor maintenance or careless operation are not malfunctions.
b. Failures that are caused in part by poor maintenance or careless operation shall be reported as excess emissions or deviations from the plan approval requirements.
c. When the malfunction, excess emissions or deviation from the plan approval requirements poses an imminent and substantial danger to public health and safety, or potential harm to the environment, the permittee shall notify the Department by telephone no later than 1 hour after the incident.
d. Any malfunction, excess emissions or deviation from the plan approval requirements that is not subject to the notice requirements of subsection (c) of this plan approval condition shall be reported to the Department within 24 hours of discovery. In notifying the Department, the permittee shall describe the following:
(i) Name and location of the facility;
(ii) Nature and cause of the malfunction or breakdown;
(iii) Time when the malfunction or breakdown was first observed;
(iv) Expected duration of excess emissions;
(v) Estimated rate of emissions; and
(vi) Corrective actions or preventative measures taken.
e. The permittee shall notify the Department immediately when corrective measures have been accomplished.
f. Upon the request of the Department, the permittee shall submit a full written report to the Regional Air Program Manager within 15 days of the malfunction, excess emissions or deviation from the plan approval requirements.
277. This plan approval authorizes temporary operation of the source covered by this plan approval provided the following conditions are met:
a. The Department must receive written notice from the Owner/Operator of the completion of construction and the Operator's intent to commence operation at least 5 working days prior to the commencement of operation. The notice should state when construction will be completed and when Operator expects to commence operation.
b. Operation is authorized only to facilitate the start-up and shake-down of sources and air cleaning devices, to permit operations pending the issuance of an operating permit or to permit the evaluation of the source(s) for compliance with all applicable regulations and requirements.
c. This condition authorizes temporary operation of the sources for a period of 180 days from the date of commencement of operation, provided the Department receives notice from the Owner/Operator under subpart (a), above.
d. The Owner/Operator may request an extension if compliance with all applicable regulations and plan approval requirements has not been established. The extension request shall be submitted in writing at least 15 days prior to the end of this period of temporary operation and shall provide a description of the compliance status of the source, a detailed schedule for establishing compliance and the reasons compliance has not been established.
e. The notice submitted by the Owner/Operator Under subpart (a), above, prior to the expiration of this plan approval, shall modify the plan approval expiration date. The new plan approval expiration date shall be 180 days from the date of commencement of operation.
278. Under the Prevention of Significant Deterioration provisions of 40 CFR 52.21 and of 25 Pa. Code § 127.83, this plan approval shall be null and void if construction (as defined in 40 CFR 52.21(b)(8)) has not commenced within 18 months of the issuance of the plan approval or if there is more than an 18-month lapse in construction. The permittee shall submit to the Department a detailed construction schedule for the entire facility within 180 days of issuance of the plan approval.
279. The facility is subject to the Title V operating permit requirements of 25 Pa. Code Chapter 127, Subchapters F and G. The permittee shall submit a complete and timely Title V operating permit application to the Department no later than 120 days after being notified by the Department to do so. The permittee shall include the information specified in 25 Pa. Code § 127.503 in the Title V operating permit application. The Title V operating permit application shall include a complete compliance assurance monitoring (CAM) plan in accordance with 40 CFR 64.4 for each applicable air cleaning device. Additionally, the permittee shall comply with all applicable requirements as specified in 40 CFRs 64.1--64.10 regarding CAM requirements for each applicable air cleaning device. The Title V operating permit application is timely if a complete application is submitted to the Department within the time frame specified above and applicable fees have been paid in accordance with 25 Pa. Code § 127.704. The application is complete if it contains sufficient information to begin processing the application, has the applicable sections completed and has been signed by a responsible official as defined in 25 Pa. Code § 121.1. A Title V operating permit application can be obtained by contacting the Department.
280. Any notification required as a result of any condition herein should be directed to Robert B. Elliott and Cortney A. Danneker, 208 West Third Street, Suite 101, Williamsport, PA 17701-6448, (570) 321-6574 and (570) 321-6561.
A copy of the plan approval application is available for public inspection during normal business hours at the address listed below. Persons interested in inspecting the application must schedule an appointment in advance.
A public hearing will be held at 7:30 p.m. on Wednesday, May 2, 2007, at the Curwensville High School auditorium, 650 Beech Street, in Curwensville for the purpose of receiving comments on the Department's proposed issuance of plan approval for the construction of the respective facility. The public hearing will be preceded by a public meeting, scheduled to begin at 6:30 p.m., during which time a brief description of the proposed project and explanation of the plan approval process will be given and an opportunity to ask questions will be provided. Notice of this public meeting and hearing was published in the Clearfield Progress on April 2, 2007.
Anyone unable to attend the public hearing who wishes to protest the issuance of plan approval or provide the Department with information which he/she believes should be considered in the Department's review of the respective plan approval application may do so by submitting the protest or information, in writing, to the Department at the address listed below. Protests or comments must be received by the Department within 30 days of the last date of publication of this notice in order to be considered. Each protest or comment should include the name, address and telephone number of the person submitting the protest or comment, as well as a precise statement explaining the relevancy of the protest or comment being presented to the Department.
Written protests or comments should be directed to David W. Aldenderfer, Environmental Program Manager, Air Quality Program, Department of Environmental Protection, 208 West Third Street, Suite 101, Williamsport, PA 17701-6448.
For additional information regarding the respective plan approval application, contact Richard L. Maxwell, Jr., Chief, New Source Review Section, Air Quality Program, Department of Environmental Protection, 208 West Third Street, Suite 101, Williamsport, PA 17701-6448, telephone (570) 327-3640.
Northwest Region: Air Quality Program, 230 Chestnut Street, Meadville, PA 16335-3481, George Monasky, New Source Review Chief, (814) 332-6940.
62-017P: United Refining Co. (15 Bradley Street, Warren, PA 16365) for modification of Boiler No. 4 to install flue gas recirculation in City of Warren, Warren County. This is a Title V facility. The public notice is required for sources required to obtain a Plan Approval at Title V facilities in accordance with 25 Pa. Code § 127.44. This plan approval will, in accordance with 25 Pa. Code § 127.450, be incorporated into the Title V operating permit through an administrative amendment at a later date. The source shall comply with the following conditions, which will satisfy the requirements of 25 Pa. Code § 127.12b (pertaining to plan approval terms and conditions) and will demonstrate BAT for the source:
* Subject to 25 Pa. Code 123.22(a)(1)
* The source shall comply with 25 Pa. Code 123.1, 123.31, & 123.41 for Fugitive, Odors and Visible Emissions respectively.
* The source shall meet the following emission limitations:
* SOx: 7.21 no./hr and 28.2 tpy based on a consecutive 12-month period [Compliance with this requirement assures compliance with SO2 PA: 62-017E condition 4 and 62-302-010A]
* CO: 37.7 no./hr and 147.2 tpy based on a consecutive 12-month period [Compliance with this requirement assures compliance with 62-302-010A]
* NOx: 10.76 no./hr and 42.0 tpy based on a consecutive 12-month period [Compliance with this requirement assures compliance with 62-302-010A]
* PM/PM10: 2.0 no./hr and 7.8 tpy based on a consecutive 12-month period [Compliance with this requirement assures compliance with 62-302-010A]
* VOC: 1.45 no./hr and 5.68 tpy based on a consecutive 12-month period [Compliance with this requirement assures compliance with 62-302-010A]
* Subject to 40 CFR 60 Subparts D and J
* The sulfur content shall not exceed the following:
* No. 6 Fuel Oil: 1.5% by weight
* Used Oil: 0.7% by weight
* Refinery Fuel Oil: 2.8% by weight
* H2S content in refinery fuel gas shall not exceed 0.1 grain/dscf.
* The used oil burned shall not exceed any of the specified acceptable levels (ppm by weight) given below:
* Arsenic < 5 ppm
* Cadmium < 2 ppm
* Chromium < 10 ppm
* Lead < 100 ppm
* PCBH < 10 ppm
* Total Halides < 1000 ppm
* Flash > 100F
* The fuel oil burned shall be sampled not less than three times per week. If the % sulfur by weight exceeds the limit or if the used oil exceeds any of the specified acceptable levels (ppm by weight), the permittee will submit the results to the Department within 5 days from the sampling. The permittee shall keep the results in a file for at least 5 years. This file shall be made available to the Department upon request.
* Within 60 days after written approval by the Department of the Phase I monitoring plan, the permittee shall proceed with Performance Specification Testing. If any additional equipment purchases or installation of equipment are required to meet Department monitoring system requirements, an appropriate schedule extension will be granted. The Department's Bureau of Air Quality, CEM Section, shall be advised in writing at least 45 days prior to Performance Specification Testing and provided the opportunity to observe and participate in all testing. A testing protocol, describing all testing procedures and methodology to be used shall accompany the notice of testing. Schedule changes shall be reported seven days prior to testing except that failed tests may be repeated immediately. During testing, the source shall be operated in a manner that is representative of normal operating conditions. At least one hour of normal operation with the monitoring system actually conducting measurements shall occur prior to conducting any testing. The CEM Section reserves the right to conduct testing during the Performance Specification Testing or at any time thereafter. All Performance Specification Testing shall be conducted in accordance with the appropriate performance specification test procedures contained in the Department's ''Continuous Source Monitoring Manual.'' Note that the entire CEMS, including all data handling, recordkeeping and reporting systems/procedures shall be operational prior to testing. All data collected shall be reported to the Department in a format approved by the Department.
* After certification of the NOx CEM, this condition is no longer applicable. The source shall be tested annually to demonstrate compliance with the NOx emission limits. Testing shall be done in accordance with the provisions of 25 Pa. Code Chapter 139 and the following conditions:
* At least 60 days prior to the test, three copies of a test procedure and sketch with dimensions indicating the location of sampling ports and other data to ensure the collection of representative samples shall be submitted to the Department.
* At least two weeks prior to the test, the Department shall be informed of the date and time of the test.
* Within 30 days after completion of the test, three copies of the complete test report, including all operating conditions, shall be submitted to the Department for approval. (Authority for this condition is also derived from 25 Pa. Code 129.92)
* The permittee shall perform a stack test within 6 months of initial Title V permit issuance and then within 6 months of Title V permit renewal thereafter, in accordance with 25 Pa. Code Chapter 139, for SOx (lbs/mmBtu) and (lbs/hr), CO (lbs/hr), VOC (lbs/hr) and PM (lbs/mmBtu) and (lbs/hr).
* The permittee shall submit three copies of a pretest protocol, in accordance with 25 Pa. Code Chapter 139, 60 days prior to performing stack test, required under part (d), to the Department for approval.
* The permittee shall submit three copies of the stack test report within sixty days after completion of stack test, required under part (d), to the Department for approval.
* Subject to 25 Pa. Code 123.46 and 123.51
* Subject to 25 Pa. Code 139.101 and 139.103
* The permittee shall maintain daily records of gallons of fuel oil used. The records shall be maintained for at least 5 years and the file shall be made available to the Department upon request.
* The Flue Gas Recirculation (FGR) system shall be installed and operated in accordance with the manufacturer's specifications and in accordance with good air pollution control practices.
* The permittee shall perform an annual tune-up on the combustion process. The emissions of NOx shall be minimized by annual combustion tuning, good perating practices and good air pollution control practices. The annual tune-up shall include, but not be limited to, the following:
* Inspection, adjustment, cleaning or replacement of fuel-burning equipment, including the burners and moving parts necessary for proper operation as specified by the manufacturer.
* Inspection of the flame pattern or characteristics and adjustments necessary to minimize total emissions of NOx and to the extent practicable minimize emissions of CO.
* Inspection of the air-to-fuel ratio control system and adjustments ncessary to ensure proper calibration and operation as specified by the manufacturer.
* Recording all adjustments in a permanently bound log book containing, at a minimum, the following information:
* The date of the tuning procedure.
* The name of the service company and technicians.
* The final operating rate or load.
* The final CO and NOx emission rates in lb/mmBtu.
* The final excess oxygen rate.
* The source shall be maintained and operated in accordance with the manufacturer's specifications and in accordance with good air pollution control practices.
* The permittee shall comply with the following requirements:
* NOx Account: 25 Pa. Code § 145.10--145.14.
* Accounting Process for Deposit, Use and Transfer of Allowance: 25 Pa. Code § 145.50--145.57.
* NOx Allowance Transfers: 25 Pa. Code § 145.60--145.62.
* Opt-In Process: 25 Pa. Code § 145.80--145.88.
* The emission limitations, monitoring and all other requirements of the NOx Budget Trading Program established in 25 Pa. Code § 145.1-145.90 are hereby incorporated by reference.
* Except as provided under 25 Pa. Code § 145.11 (relating to alternate NOx authorized account representative), each NOx budget source, including all NOx budget units at the source, shall have one and only one, NOx authorized account representative, with regard to all matters under the NOx Budget Trading Program concerning the source or any NOx budget unit at the source. Each submission under the NOx Budget Trading Program shall be submitted, signed and certified by the NOx authorized account representative for each NOx budget source on behalf of which the submission is made.
* Monitoring requirements.
* The owners and operators and the NOx authorized account representative of each NOx budget source and each NOx budget unit at the source shall comply with the monitoring requirements of 25 Pa. Code § 145.70--145.76 (relating to recordkeeping and recording requirements).
* The emissions measurements recorded and reported in accordance with 25 Pa. Code § 145.70--145.76 shall be used to determine compliance by the unit with the NOx budget emissions limitation under 25 Pa. Code § 145.6(c).
* NOx requirements.
* The owners and operators of each NOx budget source and each NOx budget unit at the source shall hold NOx allowances available for compliance deductions under 25 Pa. Code § 145.54 (relating to compliance), as of the NOx allowance transfer deadline, in the unit's compliance account and the source's overdraft account in an amount not less than the total NOx emissions for the control period from the unit, as determined in accordance with 25 Pa. Code § 145.70--145.76 plus any amount necessary to account for actual heat input under 25 Pa. Code § 145.42(e) (relating to NOx allowance allocations) for the control period or to account for excess emissions for a prior control period under 25 Pa. Code § 145.54(d) or to account for withdrawal from the NOx Budget Trading Program, or a change in regulatory status, of a NOx budget optin unit under 25 Pa. Code § 145.86 or 25 Pa. Code § 145.87 (relating to optin source withdrawal from NOx Budget Trading Program; and optin source change in regulatory status).
* Each ton of NOx emitted in excess of the NOx budget emissions limitation shall constitute a separate violation of this subchapter and the act.
* A NOx budget unit shall be subject to paragraph (1) above starting on March 1, 2003, or the date on which the unit commences operation, whichever is later.
* NOx allowances shall be held, deducted from or transferred among NOx Allowance Tracking System accounts in accordance with 25 Pa. Code § 145.40--145.43, 25 Pa. Code § 145.50--145.57, 25 Pa. Code § 145.60--145.62 and 25 Pa. Code § 145.80--145.88.
* A NOx allowance may not be deducted, to comply with paragraph 1 above, for a control period in a year prior to the year for which the NOx allowance was allocated.
* A NOx allowance allocated by the Department under the NOx Budget Trading Program is a limited authorization to emit 1 ton of NOx in accordance with the NOx Budget Trading Program. No provision of the NOx Budget Trading Program or an exemption under 25 Pa. Code § 145.4(b) or 145.5 (relating to applicability; and retired unit exemption) and no provision of law limit the authority of the United States or the Department to terminate or limit the authorization.
* A NOx allowance allocated by the Department under the NOx Budget Trading Program does not constitute a property right.
* Excess emissions. The owners and operators of a NOx budget unit that has excess emissions in any control period shall do the following:
* Surrender the NOx allowances required for deduction under 25 Pa. Code § 145.54(d)(1) (relating to compliance).
* Recordkeeping and reporting requirements.
* Unless otherwise provided, the owners and operators of the NOx budget source and each NOx budget unit at the source shall maintain at a central location and provide upon request by the Department or the NOx Budget Administrator the following documents for 5 years from the date the document is created. This period may be extended for cause, at any time prior to the end of 5 years, in writing by the Department or the Administrator.
* Certification applications. The NOx authorized account representative shall submit an application to the Department within 45 days after completing all initial certification or recertification tests required under 25 Pa. Code § 145.71 (relating to initial certification and recertification procedures) including the information required under 40 CFR Part 75, Subpart H.
* Source emissions reporting requirements.
* The NOx authorized account representative shall submit to the Department and the NOx Budget Administrator a quarterly emissions report in accordance with the requirements of 25 Pa. Code § 145.74(d).
* The NOx authorized account representative shall submit to the Department and the NOx Budget Administrator a compliance certification in support of each quarterly report required under 25 Pa. Code § 145.74(d) based on reasonable inquiry of those persons with primary responsibility for ensuring that all of the unit's emissions are correctly and fully monitored.
* Compliance certification report. For each control period in which one or more NOx budget units at a source are subject to the NOx budget emissions limitation, the NOx authorized account representative of the source shall submit to the Department and the NOx Budget Administrator by November 30 of that year, a compliance certification report for the source covering all of the units.
* Emission reduction credit provisions. NOx budget units may create, transfer and use emission reduction credits (ERCs) in accordance with Chapter 127 (relating to construction, modification, reactivation and operation of sources) and 25 Pa. Code § 145.90. ERCs may not be used to satisfy NOx allowance requirements.
16-149A: Clarion Laminates, LLC (143 Fiberboard Road, Shippenville, PA 16245) Notice is hereby given in accordance with 25 Pa. Code §§ 127.44(b) and 127.424(b) that the Department intends to issue a plan approval to install two laminate flooring lines and associated equipment at a new facility adjacent to the existing Clarion Boards, LLC facility located in Paint Township, Clarion County. The facility will be a major facility. This plan approval will, in accordance with 25 Pa. Code § 127.450, be incorporated into the Title V operating permit through an administrative amendment at a later date.
As a general summary, the following requirements are applicable to the four dust collectors to control emissions from two laminating lines and two profiling lines:
1. a. Particulate emissions from the source shall not exceed 0.005 grain/dscf.
b. Particulate emissions from the source shall not exceed 1.7 pounds per hour.
2. The stack tests shall be performed in accordance with the provisions of Chapter 139 of the Rules and Regulations of the Department to demonstrate compliance with the PM and opacity emission limits for this source.
3. Continuous Assurance Monitoring (CAM) limits that include pressure drop ranges and maximum visual emission limits as indicators to show compliance.
4. Applicable monitoring and recordkeeping conditions to indicate compliance with the previously listed requirements.
Copies of the application, DEP's analysis and other documents used in the evaluation of the application are available for public review during normal business hours at 230 Chestnut Street, Meadville, PA 16335.
Interested persons wishing to provide DEP with additional information, which they believe should be considered prior to the issuance of this permit, may submit the information to the address shown in the preceding paragraph. The Department will consider any written comments received within 30 days of the publication of this notice. Each written comment must contain the following: name, address and telephone number of the person submitting the comments. Identification of the proposed permit [No.]. A concise statement regarding the relevancy of the information or objections to the issuance of the permit.
Persons with a disability who wish to comment and require an auxiliary aid, service or other accommodations to do so should by contacting Carolyn Cooper, P. E., or the Pennsylvania AT&T relay service at (800) 654-5984 (TDD) to discuss how the Department may accommodate your needs.
If a plan approval has not undergone the above public notice process, the change to an operating permit must be treated as a significant modification. In these situations the Department should follow the procedures described in §§ 127.421--127.431 for State-only operating permits or §§ 127.521--127.524 for Title V operating permits.
Department of Public Health, Air Management Services: 321 University Avenue, Philadelphia, PA 19104, Edward Braun, Chief, (215) 685-9476.
AMS 07024: Premier Medical (10090 Sandmeyer Lane, Philadelphia, PA 19116) for a minor modification of Plan Approval No. 99125 to remove the capability to process halogenated solvents in their vapor degreaser in the City of Philadelphia, Philadelphia County. Removing the capability to use halogenated solvents removes applicability to 40 CFR 63 Subpart T for halogenated solvent cleaning. The plan approval will contain operating, monitoring and recordkeeping requirements to ensure operation within all applicable requirements.
[Continued on next Web Page]
No part of the information on this site may be reproduced for profit or sold for profit.This material has been drawn directly from the official Pennsylvania Bulletin full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
