[38 Pa.B. 5598]
[Saturday, October 11, 2008]
[Continued from previous Web Page] Compliance period--The period of time, not to exceed 1 year, for which the ACP limit and ACP emissions are calculated and for which compliance with the ACP limit is determined, as specified in the ACP agreement.
Construction, panel and floor covering adhesive--
(i) A one-component adhesive that is designed exclusively for the installation, remodeling, maintenance or repair of:
(A) Structural and building components that include the following:
(I) Beams.
(II) Trusses.
(III) Studs.
(IV) Paneling (drywall or drywall laminates, fiberglass reinforced plastic (FRP), plywood, particle board, insulation board, predecorated hardboard or tileboard, and the like).
(V) Ceiling and acoustical tile.
(VI) Molding, fixtures, countertops or countertop laminates, cove or wall bases and flooring or subflooring.
(B) Floor or wall coverings that include, but are not limited to, the following:
(I) Wood or simulated wood covering.
(II) Carpet, carpet pad or cushion, vinyl-backed carpet.
(III) Flexible flooring material.
(IV) Nonresilient flooring material.
(V) Mirror tiles and other types of tiles.
(VI) Artificial grass.
(ii) the term does not include the following:
(A) Floor seam sealer.
(B) Units of product that weigh more than 1 pound and consist of more than 16 fluid ounces, less packaging.
* * * * *
Consumer product--
(i) A chemically formulated product used by household and institutional consumers including the following:
(A) Detergents.
(B) Cleaning compounds.
(C) Polishes.
(D) Floor finishes.
(E) Cosmetics.
(F) Personal care products.
(G) Home, lawn and garden products.
(H) Disinfectants.
(I) Sanitizers.
(J) Aerosol paints.
(K) Automotive specialty products.
(L) Aerosol adhesives, including aerosol adhesives used for consumer, industrial or commercial uses.
* * * * *
Contact adhesive--
(i) An adhesive that:
(A) Is designed for application to both surfaces to be bonded together.
(B) Is allowed to dry before the two surfaces are placed in contact with each other.
(C) Forms an immediate bond that is impossible, or difficult, to reposition after both adhesive-coated surfaces are placed in contact with each other.
(D) Does not need sustained pressure or clamping of surfaces after the adhesive-coated surfaces have been brought together using sufficient momentary pressure to establish full contact between both surfaces.
(ii) The term does not include the following:
(A) Rubber cements that are primarily intended for use on paper substrates.
(B) Vulcanizing fluids that are designed and labeled for tire repair only.
(C) Units of product, less packaging, that consist of more than 1 gallon.
Contact adhesive--general purpose--A contact adhesive that is not a ''contact adhesive--special purpose.''
Contact adhesive--special purpose--A contact adhesive that is used for either of the following:
(i) To bond melamine-covered board, unprimed metal, unsupported vinyl, Teflon, ultra-high molecular weight polyethylene, rubber, high pressure laminate or wood veneer 1/16 inch or less in thickness to a porous or nonporous surface, and is sold in units of product, less packaging, that contain more than 8 fluid ounces.
(ii) In automotive applications that are either of the following:
(A) Automotive under-the-hood applications requiring heat, oil or gasoline resistance.
(B) Attachment of body-side molding, automotive weatherstrip or decorative trim.
Container/packaging--
(i) The parts of the consumer or institutional product which serve only to contain, enclose, incorporate, deliver, dispense, wrap or store the chemically formulated substance or mixture of substances which is solely responsible for accomplishing the purposes for which the product was designed or intended.
(ii) The term includes an article onto or into which the principal display panel and other accompanying literature or graphics are incorporated, etched, printed or attached.
* * * * *
Crawling bug insecticide--
(i) An insecticide product that is designed for use against ants, cockroaches or other household crawling arthropods, including mites, silverfish or spiders.
(ii) The term does not include products designed to be used exclusively on humans or animals, or house dust mite product. For the purposes of this definition only:
(A) House dust mite. Mites which feed primarily on skin cells shed in the home by humans and pets and which belong to the phylum Arthropoda, the subphylum Chelicerata, the class Arachnida, the subclass Acari, the order Astigmata and the family Pyroglyphidae.
(B) House dust mite product. A product whose label, packaging or accompanying literature states that the product is suitable for use against house dust mites, but does not indicate that the product is suitable for use against ants, cockroaches or other household crawling arthropods.
* * * * *
Deodorant--For products manufactured as follows:
(i) Before January 1, 2009, a product, including aerosols, roll-ons, sticks, pumps, pads, creams and squeeze-bottles, that is intended by the manufacturer to be used to minimize odor in the human axilla by retarding the growth of bacteria which cause the decomposition of perspiration.
(ii) On or after January 1, 2009, a product, including aerosols, roll-ons, sticks, pumps, pads, creams and squeeze-bottles, that indicates or depicts on the container or packaging, or on a sticker or label affixed to the container or packaging, that the product can be used on or applied to the human axilla to provide a scent or minimize odor. The term includes a deodorant body spray product that indicates or depicts on the container or packaging, or on a sticker or label affixed to the container or packaging, that it can be used on or applied to the human axilla.
Deodorant body spray--For products manufactured as follows:
(i) Before January 1, 2009, a personal fragrance product with 20% or less fragrance by weight.
(ii) On or after January 1, 2009, a personal fragrance product with 20% or less fragrance by weight, that is designed for application all over the human body to provide a scent.
(iii) The term includes a deodorant product that indicates or depicts on the container or packaging, or on a sticker or label affixed to the container or packaging, that it can be used on or applied to the human axilla.
Device--
(i) An instrument or contrivance (other than a firearm) which is designed for trapping, destroying, repelling or mitigating a pest or other form of plant or animal life (other than humans and other than bacteria, viruses or other microorganisms on or in living humans or living animals).
(ii) The term does not include equipment used for the application of pesticides when sold separately.
Disinfectant--
(i) A product intended to destroy or irreversibly inactivate infectious or other undesirable bacteria, pathogenic fungi or viruses on surfaces or inanimate objects and whose label is registered under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) (7 U.S.C.A. §§ 136--136y).
(ii) The term does not include the following:
(A) Products designed solely for use on humans or animals.
(B) Products designed for agricultural use.
(C) Products designed solely for use in swimming pools, therapeutic tubs or hot tubs.
(D) Products which, as indicated on the principal display panel or label, are designed primarily for use as bathroom and tile cleaners, glass cleaners, general purpose cleaners, toilet bowl cleaners or metal polishes.
* * * * *
Dry cleaning fluid--
(i) A nonaqueous liquid product designed and labeled exclusively for use on:
(A) Fabrics which are labeled ''for dry clean only,'' such as clothing or drapery.
(B) ''S-coded'' fabrics.
(ii) The term includes those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place.
* * * * *
Dusting aid--
(i) A product designed to assist in removing dust and other soils from floors and other surfaces without leaving a wax or silicone based coating.
(ii) The term does not include pressurized gas duster.
Electrical cleaner--
(i) A product labeled to remove heavy soils like grease, grime or oil from electrical equipment, including electric motors, armatures, relays, electric panels and generators.
(ii) The term does not include the following:
(A) General purpose cleaner.
(B) General purpose degreaser.
(C) Dusting aid.
(D) Electronic cleaner.
(E) Energized electrical cleaner.
(F) Pressurized gas duster.
(G) Engine degreaser.
(H) Antistatic product.
(I) Products designed to clean the casings or housings of electrical equipment.
Electronic cleaner--
(i) A product labeled for the removal of dirt, moisture, dust, flux or oxides from the internal components of electronic or precision equipment, including circuit boards and the internal components of electronic devices, including the following:
(A) Radios.
(B) Compact disc (CD) players.
(C) Digital video disc (DVD) players.
(D) Computers.
(ii) The term does not include the following:
(A) General purpose cleaner.
(B) General purpose degreaser.
(C) Dusting aid.
(D) Pressurized gas duster.
(E) Engine degreaser.
(F) Electrical cleaner.
(G) Energized electrical cleaner.
(H) Antistatic product.
(I) Products designed to clean the casings or housings of electronic equipment.
Energized electrical cleaner--
(i) A product that meets both of the following:
(A) The product is labeled to clean or degrease electrical equipment, where cleaning or degreasing is accomplished when electrical current exists, or when there is a residual electrical potential from a component, such as a capacitor.
(B) The product label clearly states that the product is for energized equipment use only and is not to be used for motorized vehicle maintenance or maintenance of motorized vehicle parts.
(ii) The term does not include electronic cleaners.
* * * * *
Enforceable sales record--A written, point-of-sale record or other Department-approved system of documentation from which the mass, in pounds (less product container and packaging), of an ACP product sold to the end user in this Commonwealth during the applicable compliance period can be accurately documented. For the purposes of this subchapter, the term includes the following types of records:
(i) Accurate records of direct retail or other outlet sales to the end user during the applicable compliance period.
(ii) Accurate compilations, made by independent market surveying services, of direct retail or other outlet sales to the end users for the applicable compliance period, provided that a detailed method which can be used to verify data comprising the summaries is submitted by the responsible ACP party and approved by the Department.
(iii) Other accurate product sales records approved by the Department as meeting the criteria specified in this definition.
Engine degreaser--A cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.
Existing product--A formulation of the same product category and form sold, supplied, manufactured or offered for sale in this Commonwealth prior to January 1, 2005, or a subsequently introduced identical formulation.
Fabric protectant--
(i) A product designed to be applied to fabric substrates to protect the surface from soiling by dirt and other impurities or to reduce absorption of liquid into the fabric's fibers.
(ii) The term does not include the following:
(A) Waterproofers.
(B) Products designed for use solely on leather.
(C) Products designed for use solely on fabrics which are labeled ''dry clean only'' and sold in containers of 10 fluid ounces or less.
Fabric refresher--
(i) A product labeled to neutralize or eliminate odors on nonlaundered fabric, including the following fabrics:
(A) Soft household surfaces.
(B) Rugs.
(C) Carpeting.
(D) Draperies.
(E) Bedding.
(F) Automotive interiors.
(G) Footwear.
(H) Athletic equipment.
(I) Clothing.
(J) Household furniture or objects upholstered or covered with fabrics including wool, cotton or nylon.
(ii) The term does not include the following:
(A) Antistatic product.
(B) Carpet and upholstery cleaner.
(C) Soft household surface sanitizer.
(D) Footwear or leather care product.
(E) Spot remover.
(F) Disinfectant.
(G) Products labeled for application to both fabric and human skin.
(iii) For the purposes of this definition, ''soft household surface sanitizer'' means a product labeled to neutralize or eliminate odors on surfaces listed in subparagraph (i) and the label for which is registered as a sanitizer under the Federal Insecticide, Fungicide and Rodenticide Act (FIFRA).
Facial cleaner or soap--A cleaner or soap designed primarily to clean the face.
(i) The term includes the following:
(A) Facial cleansing cream.
(B) Semisolid.
(C) Liquid.
(D) Lotion.
(E) Substrate-impregnated forms.
(ii) The term does not include the following:
(A) Prescription drug products.
(B) Antimicrobial hand or body cleaner or soap.
(C) Astringent/toner.
(D) General-use hand or body cleaner or soap.
(E) Medicated astringent/medicated toner.
(F) Rubbing alcohol.
* * * * *
Flea and tick insecticide--
(i) An insecticide product that is designed for use against fleas, ticks, their larvae or their eggs.
(ii) The term does not include products that are designed to be used exclusively on humans or animals and their bedding.
* * * * *
Floor and wall covering adhesive remover--A product designed or labeled to remove floor or wall covering and associated adhesive from the underlying substrate.
Floor coating--An opaque coating that is designed and labeled for application to flooring, including the following:
(i) Decks.
(ii) Porches.
(iii) Steps.
(iv) Other horizontal surfaces which may be subject to foot traffic.
Floor polish or wax--
(i) A wax, polish or other product designed to polish, protect or enhance floor surfaces by leaving a protective coating that is designed to be periodically replenished.
(ii) The term does not include the following:
(A) Spray buff products.
(B) Products designed solely for the purpose of cleanning floors.
(C) Floor finish strippers.
(D) Products designed for unfinished wood floors.
(E) Coatings subject to architectural coatings regulations in this chapter.
Floor seam sealer--A product designed and labeled exclusively for bonding, fusing or sealing (coating) seams between adjoining rolls of installed flexible sheet flooring.
Floor wax stripper--
(i) A product designed to remove natural or synthetic floor polishes or waxes through breakdown of the polish or wax polymers, or by dissolving or emulsifying the polish or wax.
(ii) The term does not include the following:
(A) Aerosol floor wax stripper.
(B) Products designed to remove floor wax solely through abrasion.
Flying bug insecticide--An insecticide product that is designed for use against flying insects or other flying arthropods, including mosquitoes, moths or gnats.
(i) The term does not include the following:
(A) Wasp and hornet insecticide.
(B) Products that are designed to be used exclusively on humans or animals.
(C) A moth-proofing product.
(ii) For the purposes of this definition, ''moth-proofing product'' means a product whose label, packaging or accompanying literature indicates that the product is designed to protect fabrics from damage by moths, but does not indicate that the product is suitable for use against flying insects or other flying arthropods.
Footwear or leather care product--
(i) A product designed or labeled to be applied to footwear or to other leather articles or components, to maintain, enhance, clean, protect or modify the appearance, durability, fit or flexibility of the footwear or leather article or component. Footwear includes both leather and nonleather foot apparel.
(ii) The term does not include the following:
(A) Fabric protectant.
(B) General purpose adhesive.
(C) Contact adhesive.
(D) Vinyl/fabric/leather/polycarbonate coating.
(E) Rubber and vinyl protectant.
(F) Fabric refresher.
(G) Products used solely for deodorizing.
(H) Sealant products with adhesive properties used to create external protective layers greater than 2 millimeters thick.
Fragrance--A substance or complex mixture of aroma chemicals, natural essential oils and other functional components with a combined vapor pressure not in excess of 2 mm of Mercury at 20° C, the sole purpose of which is to impart an odor or scent, or to counteract a malodor.
Furniture coating--A paint designed for application to room furnishings, including cabinets (kitchen, bath and vanity), tables, chairs, beds and sofas.
Furniture maintenance product--
(i) A wax, polish, conditioner or other product designed for the purpose of polishing, protecting or enhancing finished wood surfaces other than floors.
(ii) The term does not include the following:
(A) Dusting aids.
(B) Wood cleaner.
(C) Products designed solely for the purpose of cleaning.
(D) Products designed to leave a permanent finish, including stains, sanding sealers and lacquers.
Gasket adhesive or thread locking adhesive remover--
(i) A product designed or labeled to remove gasket or thread locking adhesives.
(ii) The term includes products labeled for dual use as a paint stripper and gasket adhesive remover or thread locking adhesive remover.
* * * * *
General purpose adhesive--
(i) A nonaerosol adhesive designed for use on a variety of substrates.
(ii) The term does not include the following:
(A) Contact adhesive.
(B) Construction, panel and floor covering adhesive.
(C) Adhesives designed exclusively for application on one specific category of substrates (that is, substrates that are composed of similar materials, such as different types of metals, paper products, ceramics, plastics, rubbers or vinyls).
(D) Adhesives designed exclusively for use on one specific category of articles (that is, articles that may be composed of different materials but perform a specific function, such as gaskets, automotive trim, weather-stripping or carpets).
(E) Units of product that weigh more than 1 pound and consist of more than 16 fluid ounces, less packaging.
General purpose adhesive remover--A product designed or labeled to remove cyanoacrylate adhesives as well as nonreactive adhesives or residue from a variety of substrates.
(i) The term includes products that remove the following:
(A) Thermoplastic adhesives.
(B) Pressure sensitive adhesives.
(C) Dextrine or starchbased adhesives.
(D) Casein glues.
(E) Rubber or latex-based adhesives.
(F) Stickers, decals, stencils or similar materials.
(ii) The term does not include floor and wall covering adhesive remover.
General purpose cleaner--A product designed for general all-purpose cleaning, in contrast to cleaning products designed to clean specific substrates in certain situations.
(i) The term includes products designed for general floor cleaning or kitchen or countertop cleaning and cleaners designed to be used on a variety of hard surfaces.
(ii) The term does not include general purpose degreaser and electronic cleaner.
General purpose degreaser--A product labeled to remove or dissolve grease, grime, oil and other oil-based contaminants from a variety of substrates, including automotive or miscellaneous metallic parts.
(i) The term does not include the following:
(A) Engine degreaser.
(B) General purpose cleaner.
(C) Adhesive remover.
(D) Electrical cleaner.
(E) Electronic cleaner.
(F) Energized electrical cleaner.
(G) Metal polish/cleanser.
(H) Products used exclusively in solvent cleaning tanks or related equipment.
(I) Products that are labeled ''not for retail sale'' and are sold exclusively to establishments that manufacture or construct goods or commodities.
(ii) For the purposes of this definition, the term ''solvent cleaning tanks or related equipment'' includes the following:
(A) Cold cleaners.
(B) Vapor degreasers.
(C) Conveyorized degreasers.
(D) Film cleaning machines.
(E) Products designed to clean miscellaneous metallic parts by immersion in a container.
General-use hand or body cleaner or soap--A cleaner or soap designed to be used routinely on the skin to clean or remove typical or common dirt and soils.
(i) The term includes the following:
(A) Hand or body washes.
(B) Dual-purpose shampoo-body cleaners.
(C) Shower or bath gels.
(D) Moisturizing cleaners or soaps.
(ii) The term does not include the following:
(A) Prescription drug products.
(B) Antimicrobial hand or body cleaner or soap.
(C) Astringent/toner.
(D) Facial cleaner or soap.
(E) Hand dishwashing detergent, including antimicrobial.
(F) Heavy-duty hand cleaner or soap.
(G) Medicated astringent/medicated toner.
(H) Rubbing alcohol.
Glass cleaner--
(i) A cleaning product designed primarily for cleaning surfaces made of glass.
(ii) The term does not include products designed solely for the purpose of cleaning optical materials used in eyeglasses, photographic equipment, scientific equipment and photocopying machines.
Graffiti remover--A product labeled to remove spray paint, ink, marker, crayon, lipstick, nail polish or shoe polish from a variety of noncloth or nonfabric substrates.
(i) The term does not include the following:
(A) Paint remover or stripper.
(B) Nail polish remover.
(C) Spot remover.
(ii) Products labeled for dual use as both a paint stripper and graffiti remover are considered ''graffiti removers.''
* * * * *
Hair mousse--A hairstyling foam designed to facilitate styling of a coiffure and provide limited holding power.
Hair shine--A product designed for the primary purpose of creating a shine when applied to the hair.
(i) The term includes dual-use products designed primarily to impart a sheen to the hair.
(ii) The term does not include the following:
(A) Hair spray.
(B) Hair mousse.
(C) Hair styling product.
(D) Hair styling gel.
(E) Products whose primary purpose is to condition or hold the hair.
Hair spray--
(i) For products manufactured before January 1, 2009, a consumer product designed primarily for the purpose of dispensing droplets of a resin on and into a hair coiffure which will impart sufficient rigidity to the coiffure to establish or retain the style for a period of time.
(ii) For products manufactured on or after January 1, 2009, a consumer product that is applied to styled hair, and is designed or labeled to provide sufficient rigidity, to hold, retain or finish the style of the hair for a period of time.
(iii) The term includes the following:
(A) Aerosol hair sprays.
(B) Pump hair sprays.
(C) Spray waxes.
(D) Color, glitter or sparkle hair sprays that make finishing claims.
(E) Products that are both a styling and finishing product.
(iv) The term does not include spray products that are intended to aid in styling but do not provide finishing of a hairstyle.
(v) For the purposes of this subchapter, the terms:
(A) ''Finish'' and ''finishing'' mean the maintaining or holding of previously styled hair for a period of time.
(B) ''Style'' and ''styling'' mean the forming, sculpting or manipulating of the hair to temporarily alter the hair's shape.
Hair styling gel--A consumer product manufactured before January 1, 2009, that is a high viscosity, often gelatinous, product that contains a resin and is designed for the application to hair to aid in styling and sculpting of the hair coiffure.
Hair styling product--A consumer product manufactured on or after January 1, 2009, that is designed or labeled for the application to wet, damp or dry hair to aid in defining, shaping, lifting, styling or sculpting of the hair.
(i) The term includes the following:
(A) Hair balm.
(B) Clay.
(C) Cream.
(D) Creme.
(E) Curl straightener.
(F) Gel.
(G) Liquid.
(H) Lotion.
(I) Paste.
(J) Pomade.
(K) Putty.
(L) Root lifter.
(M) Serum.
(N) Spray gel.
(O) Stick.
(P) Temporary hair straightener.
(Q) Wax.
(R) Spray products that aid in styling but do not provide finishing of a hairstyle.
(S) Leave-in volumizers, detanglers or conditioners that make styling claims.
(ii) The term does not include the following:
(A) Hair mousse.
(B) Hair shine.
(C) Hair spray.
(D) Shampoos or conditioners that are rinsed from the hair prior to styling.
(iii) For the purposes of this subchapter, the terms:
(A) ''Finish'' and ''finishing'' mean the maintaining or holding of previously styled hair for a period of time.
(B) ''Style'' and ''styling'' mean the forming, sculpting or manipulating of the hair to temporarily alter the hair's shape.
Heavy-duty hand cleaner or soap--
(i) A product designed to clean or remove difficult dirt and soils, including oil, grease, grime, tar, shellac, putty, printer's ink, paint, graphite, cement, carbon, asphalt or adhesives from the hand with or without the use of water.
(ii) The term does not include the following:
(A) Prescription drug products.
(B) Antimicrobial hand or body cleaner or soap.
(C) Astringent/toner.
(D) Facial cleaner or soap.
(E) General-use hand or body cleaner or soap.
(F) Medicated astringent/medicated toner.
(G) Rubbing alcohol.
Herbicide--A pesticide product designed to kill or retard a plant's growth, but excludes products that are:
(i) For agricultural use.
(ii) Restricted materials that require a permit for use and possession.
High pressure laminate--Sheet materials which consist of paper, fabric or other core material that have been laminated at temperatures exceeding 265° F, and at pressures between 1,000 and 1,400 psi.
Highest sales--The maximum 1-year gross Pennsylvania sales of the ACP product in the previous 5 years, if the responsible ACP party has failed to meet the requirements for reporting enforceable sales records (for a portion of the compliance period), as specified in the ACP agreement, or the current actual 1-year enforceable sales for the product, if the responsible ACP party has provided all required enforceable sales records (for the entire compliance period), as specified in the ACP agreement.
Highest VOC content--The maximum VOC content which the ACP product has contained in the previous 5 years, if the responsible ACP party has failed to meet the requirements for reporting VOC content data (for a portion of the compliance period), as specified in the ACP agreement, or the current actual VOC content, if the responsible ACP party has provided all required VOC content data (for the entire compliance period), as specified in the ACP agreement, expressed as a percentage by weight.
Household product--A consumer product that is primarily designed to be used inside or outside of living quarters or residences that are occupied or intended for occupation by individuals, including the immediate surroundings.
Insecticide--A pesticide product that is designed for use against insects or other arthropods, but excluding products that are:
(i) For agricultural use.
(ii) For a use which requires a structural pest control license under applicable laws or regulations of the Commonwealth.
(iii) Restricted materials that require a permit for use and possession.
Insecticide fogger--An insecticide product designed to release all or most of its content, as a fog or mist, into indoor areas during a single application.
Institutional product or industrial and institutional (I&I) product--
(i) A consumer product that is designed for use in the maintenance or operation of an establishment that:
(A) Manufactures, transports or sells goods or commodities, or provides services for profit.
(B) Is engaged in the nonprofit promotion of a particular public, educational or charitable cause.
(ii) The term does not include household products and products that are incorporated into or used exclusively in the manufacture or construction of the goods or commodities at the site of the establishment.
(iii) For the purposes of this definition, the term ''establishment'' includes the following:
(A) Government agencies.
(B) Factories.
(C) Schools.
(D) Hospitals.
(E) Sanitariums.
(F) Prisons.
(G) Restaurants.
(H) Hotels.
(I) Stores.
(J) Automobile service and parts centers.
(K) Health clubs.
(L) Theaters.
(M) Transportation companies.
LVP content or lower vapor pressure content--The total weight, in pounds, of LVP compounds in an ACP product multiplied by 100 and divided by the product's total net weight (in pounds, excluding container and packaging), expressed as a percentage to the nearest 0.1.
LVP-VOC or lower vapor pressure VOC--
(i) A chemical compound or mixture that contains at least one carbon atom and meets one of the following:
(A) Has a vapor pressure less than 0.1 mm Hg at 20° C, as determined by CARB Method 310.
(B) Is a chemical compound with more than 12 carbon atoms, or a chemical mixture comprised solely of compounds with more than 12 carbon atoms as verified by formulation data, and the vapor pressure and boiling point are unknown.
(C) Is a chemical compound with a boiling point greater than 216° C, as determined by CARB Method 310.
(D) Is the weight percent of a chemical mixture that boils above 216° C, as determined by CARB Method 310.
(ii) For the purposes of this definition, ''chemical compound'' means a molecule of definite chemical formula and isomeric structure, and ''chemical mixture'' means a substance comprised of two or more chemical compounds.
* * * * *
Laundry prewash--A product that is designed for application to a fabric prior to laundering and that supplements and contributes to the effectiveness of laundry detergents or provides specialized performance, or both.
Laundry starch product--
(i) A product that is designed for application to a fabric, either during or after laundering, to impart and prolong a crisp, fresh look and which may also act to help ease ironing of the fabric.
(ii) The term includes fabric finish, sizing and starch.
Lawn and garden insecticide--An insecticide product labeled primarily to be used in household lawn and garden areas to protect plants from insects or other arthropods. Notwithstanding the requirements of § 130.372 (relating to most restrictive limit), aerosol lawn and garden insecticides may claim to kill insects or other arthropods.
Liquid--
(i) A substance or mixture of substances that is capable of a visually detectable flow as determined under ASTM D-4359-90(2000)e1, including subsequent amendments.
(ii) The term does not include powders or other materials that are composed entirely of solid particles.
Lubricant--
(i) A product designed to reduce friction, heat, noise or wear between moving parts, or to loosen rusted or immovable parts or mechanisms.
(ii) The term does not include the following:
(A) Automotive power steering fluids.
(B) Products for use inside power generating motors, engines and turbines, and their associated power-transfer gearboxes.
(C) Two cycle oils or other products designed to be added to fuels.
(D) Products for use on the human body or animals.
(E) Products that are sold exclusively to establishments which manufacture or construct goods or commodities, and are labeled ''not for retail sale.''
* * * * *
Medicated astringent/medicated toner--A product regulated as a drug by the FDA which is applied to the skin for the purpose of cleaning or tightening pores.
(i) The term includes the following:
(A) Clarifiers.
(B) Substrate-impregnated products.
(ii) The term does not include the following:
(A) Hand, face or body cleaner or soap products.
(B) Astringent/toner.
(C) Cold cream.
(D) Lotion.
(E) Antiperspirants.
(F) Products that must be purchased with a doctor's prescription.
Metal polish/cleanser--A product designed primarily to improve the appearance of finished metal, metallic or metallized surfaces by physical or chemical action by removing or reducing stains, impurities or oxidation from surfaces or by making surfaces smooth and shiny.
(i) The term includes metal polishes used on:
(A) Brass.
(B) Silver.
(C) Chrome.
(D) Copper.
(E) Stainless steel.
(F) Ornamental metals.
(ii) The term does not include the following:
(A) Automotive wax, polish, sealant or glaze.
(B) Wheel cleaner.
(C) Paint remover or stripper.
(D) Products designed and labeled exclusively for automotive and marine detailing.
(E) Products designed for use in degreasing tanks.
* * * * *
Multipurpose dry lubricant--A lubricant which is:
(i) Designed and labeled to provide lubricity by depositing a thin film of graphite, molybdenum disulfide (moly) or polytetrafluoroethylene or closely related fluoropolymer (Teflon) on surfaces.
(ii) Designed for general purpose lubrication or for use in a wide variety of applications.
Multipurpose lubricant--
(i) A lubricant designed for general purpose lubrication or for use in a wide variety of applications.
(ii) The term does not include the following:
(A) Multipurpose dry lubricant.
(B) Penetrant.
(C) Silicone-based multipurpose lubricant.
Multipurpose solvent--An organic liquid designed to be used for a variety of purposes, including cleaning or degreasing of a variety of substrates, or thinning, dispersing or dissolving other organic materials.
(i) The term includes solvents used in institutional facilities, except for laboratory reagents used in analytical, educational, research, scientific or other laboratories.
(ii) The term does not include the following:
(A) Solvents used in:
(I) Cold cleaners.
(II) Vapor degreasers.
(III) Conveyorized degreasers.
(IV) Film cleaning machines.
(B) Solvents that are incorporated into or used exclusively in the manufacture or construction of the goods or commodities at the site of the establishment.
Nail polish--A clear or colored coating designed for application to the fingernails or toenails and including lacquers, enamels, acrylics, base coats and top coats.
Nail polish remover--A product designed to remove nail polish and coatings from fingernails or toenails.
* * * * *
Nonresilient flooring--Flooring of a mineral content that is not flexible, including the following:
(i) Terrazzo.
(ii) Marble.
(iii) Slate.
(iv) Granite.
(v) Brick.
(vi) Stone.
(vii) Ceramic tile.
(viii) Concrete.
* * * * *
Oven cleaner--A cleaning product designed to clean and to remove dried food deposits from oven walls.
Paint--A pigmented liquid or liquefiable or mastic composition designed for application to a substrate in a thin layer which is converted to an opaque solid film after application and is used for protection, decoration or identification, or to serve some functional purpose such as the filling or concealing of surface irregularities or the modification of light and heat radiation characteristics.
Paint remover or stripper--
(i) A product designed to strip or remove paints or other related coatings, by chemical action, from a substrate without markedly affecting the substrate.
(ii) The term does not include the following:
(A) Multipurpose solvent.
(B) Paint brush cleaners.
(C) Products designed and labeled exclusively as graffiti removers.
(D) Hand cleaner products that claim to remove paints and other related coatings from skin.
Penetrant--A lubricant designed and labeled primarily to loosen metal parts that have bonded together due to rusting, oxidation or other causes. The term does not include multipurpose lubricants that claim to have penetrating qualities, but are not labeled primarily to loosen bonded parts.
Pennsylvania sales--The sales (net pounds of product, less packaging and container, per year) in this Commonwealth for either the calendar year immediately prior to the year that the registration is due or, if that data is not available, a consecutive 12-month period commencing no earlier than 2 years prior to the due date of the registration. If direct sales data for this Commonwealth are not available, sales may be estimated by prorating National or regional sales data by population.
Personal fragrance product--A product which is applied to the human body or clothing for the primary purpose of adding a scent or masking a malodor.
(i) The term includes the following:
(A) Cologne.
(B) Perfume.
(C) Aftershave.
(D) Toilet water.
(ii) The term does not include the following:
(A) Deodorant.
(B) Medicated products designed primarily to alleviate fungal or bacterial growth on feet or other areas of the body.
(C) Mouthwashes, breath fresheners or deodorizers.
(D) Lotions, moisturizers, powders or other skin care products used primarily to alleviate skin conditions such as dryness and irritations.
(E) Products designed exclusively for use on human genitalia.
(F) Soaps, shampoos and products primarily used to clean the human body.
(G) Fragrance products designed to be used exclusively on animals.
Pesticide--
(i) A substance or mixture of substances labeled designed or intended for use in preventing, destroying, repelling or mitigating a pest, or a substance or mixture of substances labeled, designed or intended for use as a defoliant, desiccant or plant regulator.
(ii) The term does not include a substance, mixture of substances or device which the EPA does not consider to be a pesticide.
Plasticizer--A material, such as a high boiling point organic solvent, that is incorporated into a plastic to increase its flexibility, workability or distensibility, and may be determined by using ASTM E260-91, including subsequent amendments, or from product formulation data.
Pre-ACP VOC content--The lowest VOC content of an ACP product between January 1, 1990, and the date on which the application for a proposed ACP is submitted to the Department based on either the data on the product obtained from the March 12, 1991, CARB Consumer Products Survey or other accurate records available to the Department, whichever yields the lowest VOC content for the product, expressed as a percentage.
Pressurized gas duster--
(i) A pressurized product labeled to remove dust from a surface solely by means of mass air or gas flow, including surfaces like photographs, photographic film negatives, computer keyboards and other types of surfaces that cannot be cleaned with solvents.
(ii) The term does not include dusting aids.
Principal display panel or panels--The parts of a label that are so designed as to most likely be displayed, presented, shown or examined under normal and customary conditions of display or purchase. Whenever a principal display panel appears more than once, all requirements pertaining to the principal display panel shall pertain to all of the principal display panels.
* * * * *
Product category--The applicable category that best describes the product as listed in this section and in § 130.211.
Product form--For the purposes of complying with § 130.391 (relating to required reporting of information to the Department), the applicable form which most accurately describes the product's dispensing form, as follows:
(i) A = Aerosol product.
(ii) S = Solid.
(iii) P = Pump spray.
(iv) L = Liquid.
(v) SS = Semisolid.
(vi) O = Other.
* * * * *
Rubber and vinyl protectant--
(i) A product designed to protect, preserve or renew vinyl, rubber and plastic on vehicles, tires, luggage, furniture and household products such as vinyl covers, clothing and accessories.
(ii) The term does not include products primarily designed to clean the wheel rim, such as aluminum or magnesium wheel cleaners, and tire cleaners that do not leave an appearance-enhancing or protective substance on the tire.
* * * * *
Sealant and caulking compound--A product with adhesive properties that is designed to fill, seal, waterproof or weatherproof gaps or joints between two surfaces.
(i) The term does not include the following:
(A) Roof cements and roof sealants.
(B) Insulating foams.
(C) Removable caulking compounds.
(D) Clear/paintable/water resistant caulking compounds.
(E) Floor seam sealer.
(F) Products designed exclusively for automotive uses.
(G) Sealers that are applied as continuous coatings.
(H) Units of product, less packaging, which weigh more than 1 pound and consist of more than 16 fluid ounces.
(ii) For the purposes of this definition only:
(A) ''Removable caulking compounds'' means a compound which temporarily seals windows or doors for 3 to 6 month time intervals.
(B) ''Clear/paintable/water resistant caulking compounds'' means a compound which contains no appreciable level of opaque fillers or pigments; transmits most or all visible light through the caulk when cured; is paintable; and is immediately resistant to precipitation upon application.
* * * * *
Shaving cream--
(i) An aerosol product which dispenses a foam lather intended to be used with a blade or cartridge razor, or other wet-shaving system, in the removal of facial or other bodily hair.
(ii) The term does not include shaving gel.
Shaving gel--
(i) An aerosol product which dispenses a postfoaming semisolid designed to be used with a blade, cartridge razor or other shaving system in the removal of facial or other bodily hair.
(ii) The term does not include shaving cream.
Shortfall--
(i) The ACP emissions minus the ACP limit when the ACP emissions were greater than the ACP limit during a specified compliance period, expressed to the nearest pound of VOC.
(ii) The term does not include emissions occurring prior to the date that the ACP agreement is signed by the Department.
Silicone-based multipurpose lubricant--
(i) A lubricant which is:
(A) Designed and labeled to provide lubricity primarily through the use of silicone compounds, including polydimethylsiloxane.
(B) Designed and labeled for general purpose lubrication, or for use in a wide variety of applications.
(ii) The term does not include products designed and labeled exclusively to release manufactured products from molds.
* * * * *
Solid--A substance or mixture of substances which, either whole or subdivided (such as the particles comprising a powder), is not capable of visually detectable flow as determined under ASTM D-4359-90(2000)e1, including subsequent amendments.
Special purpose spray adhesive--An aerosol adhesive that meets one or more of the following definitions:
(i) Mounting adhesive. An aerosol adhesive designed to permanently mount photographs, artwork and other drawn or printed media to a backing (paper, board, cloth, and the like) without causing discoloration to the artwork.
(ii) Flexible vinyl adhesive. An aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least 5%, by weight, of plasticizer content.
(iii) Polystyrene foam adhesive. An aerosol adhesive designed to bond polystyrene foam to substrates.
(iv) Automobile headliner adhesive. An aerosol adhesive designed to bond together layers in motor vehicle headliners.
(v) Polyolefin adhesive. An aerosol adhesive designed to bond polyolefins to substrates.
(vi) Laminate repair/edgebanding adhesive. An aerosol adhesive designed for:
(A) The touch-up or repair of items laminated with high pressure laminates (for example-lifted edges, delaminates, and the like).
(B) The touch-up, repair or attachment of edge banding materials, including other laminates, synthetic marble, veneers, wood molding and decorative metals.
(vii) Automotive engine compartment adhesive. An aerosol adhesive designed for use in motor vehicle under-the-hood applications which require oil and plasticizer resistance, as well as high shear strength, at temperatures of 200--275° F.
Specialty adhesive remover--A product designed to remove reactive adhesives from a variety of substrates.
(i) Reactive adhesives include adhesives that require a hardener or catalyst for the bond to occur. Reactive adhesives include the following:
(A) Epoxies.
(B) Urethanes.
(C) Silicones.
(ii) The term does not include gasket adhesive remover or thread locking adhesive remover.
Spot remover--
(i) A product designed to clean localized areas, or remove localized spots or stains on cloth or fabric such as drapes, carpets, upholstery and clothing, that does not require subsequent laundering to achieve stain removal.
(ii) The term does not include the following:
(A) Dry cleaning fluid.
(B) Laundry prewash.
(C) Multipurpose solvent.
Spray buff product--A product designed to restore a worn floor finish in conjunction with a floor buffing machine and special pad.
* * * * *
Structural waterproof adhesive--An adhesive whose bond lines are resistant to conditions of continuous immersion in fresh or salt water, and that conforms with Federal Specification MMM-A-181D (Type 1, Grade A).
Surplus reduction--The ACP limit minus the ACP emissions when the ACP limit was greater than the ACP emissions during a given compliance period, expressed to the nearest pound of VOC. Except as provided in § 130.457 (relating to limited-use surplus reduction credits for early reformulations of ACP products), the term does not include emissions occurring prior to the date that the ACP agreement is signed by the Department.
* * * * *
TMHE--Total maximum historical emissions--The total VOC emissions from all ACP products for which the responsible ACP party has failed to submit the required VOC content or enforceable sales records. The TMHE shall be calculated for each ACP product during each portion of a compliance period for which the responsible ACP has failed to provide the required VOC content or enforceable sales records. The TMHE shall be expressed to the nearest pound and calculated according to the following calculation:
TMHE = (MHE)1 + (MHE)2 + . . . + (MHE)N where,
(i) MHE =
(Highest VOC content × Highest sales)
_________________ × Missing data days
100 × 365 (ii) 1, 2, . . . , N = each product in an ACP, up to the maximum N, for which the responsible ACP party has failed to submit the required enforceable sales or VOC content data as specified in the ACP agreement.
* * * * *
Tire sealant and inflation--A pressurized product that is designed to temporarily inflate and seal a leaking tire.
Toilet/urinal care product--A product designed to clean or to deodorize toilet bowls, toilet tanks or urinals.
(i) The term does not include the following:
(A) Bathroom and tile cleaner.
(B) General purpose cleaner.
(ii) For the purposes of this definition, the term ''toilet bowls, toilet tanks or urinals'' includes toilets or urinals connected to permanent plumbing in buildings and other structures, portable toilets or urinals placed at temporary or remote locations and toilets or urinals in vehicles like buses, recreational motor homes, boats, ships and aircraft.
* * * * *
Type B propellant--A halocarbon which is used as a propellant, including the following:
(i) Chlorofluorocarbons (CFCs).
(ii) Hydrochlorofluorocarbons (HCFCs).
(iii) Hydrofluorocarbons (HFCs).
Type C propellant--A propellant which is not a Type A or Type B propellant, including the following:
(i) Propane.
(ii) Isobutane.
(iii) N-butane.
(iv) Dimethyl ether (also known as dimethyl oxide).
Undercoating--
(i) An aerosol product designed to impart a protective, nonpaint layer to the undercarriage, trunk interior or firewall of motor vehicles to prevent the formation of rust or to deaden sound.
(ii) The term includes rubberized, mastic or asphaltic products.
* * * * *
Vinyl/fabric/leather/polycarbonate coating--A coating designed and labeled exclusively to coat vinyl, fabric, leather or polycarbonate substrates.
VOC--Volatile organic compound--An organic compound which participates in atmospheric photochemical reactions; that is, an organic compound other than those which the Administrator of the EPA designates in 40 CFR 51.100 (relating to definitions) as having negligible photochemical reactivity.
VOC content--
(i) Except for charcoal lighter material products, the total weight of VOC in a product expressed as a percentage of the product weight (exclusive of the container or packaging), as determined under § 130.431 (relating to testing for compliance).
(ii) For charcoal lighter material products only,
(Certified emissions × 100) VOC content (percent) = ______
Certified use rate
Wasp and hornet insecticide--An insecticide product that is designed for use against wasps, hornets, yellow jackets or bees by allowing the user to spray from a distance a directed stream or burst at the intended insects or their hiding place.
Waterproofer--
(i) A product designed and labeled exclusively to repel water from fabric or leather substrates.
(ii) The term does not include fabric protectant.
Wax--
(i) A material or synthetic thermoplastic substance generally of high molecular weight hydrocarbons or high molecular weight esters of fatty acids or alcohols, except glycerol and high molecular weight polymers (plastics). The term includes the following:
(i) Substances derived from the secretions of plants and animals such as carnuba wax and beeswax.
(ii) Substances of a mineral origin such as ozocerite and paraffin.
(iii) Synthetic polymers such as polyethylene.
* * * * *
Wood cleaner--
(i) A product labeled to clean wooden materials including the following:
(A) Decking.
(B) Fences.
(C) Flooring.
(D) Logs.
(E) Cabinetry.
(F) Furniture.
(ii) The term does not include the following:
(A) Dusting aid.
(B) General purpose cleaner.
(C) Furniture maintenance product.
(D) Floor wax stripper.
(E) Floor polish or wax.
(F) Products designed and labeled exclusively to preserve or color wood.
Wood floor wax--Wax-based products for use solely on wood floors.
* * * * *
[Continued on next Web Page]
No part of the information on this site may be reproduced for profit or sold for profit.This material has been drawn directly from the official Pennsylvania Bulletin full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
