§ 130.706. Container labeling.
On and after January 1, 2012, each manufacturer of an adhesive, sealant, adhesive primer or sealant primer product subject to this subchapter shall display the following information on the product container or label:
(1) A statement of the manufacturer’s recommendation regarding thinning, reducing or mixing of the product, except that:
(i) This requirement does not apply to the thinning of a product with water.
(ii) If thinning of the product prior to use is not necessary, the recommendation must specify that the product is to be applied without thinning.
(2) The maximum or the actual VOC content of the product as supplied, displayed as one of the following:
(i) Weight of VOC per volume of product, less water and exempt compounds, calculated in accordance with § 130.705(j) and (k) (relating to compliance procedures and test methods).
(ii) Weight of VOC per volume of product, calculated in accordance with § 130.705(l).
(3) The maximum or the actual VOC content of the product as applied, which includes the manufacturer’s maximum recommendation for thinning, displayed as one of the following:
(i) Weight of VOC per volume of product, less water and exempt compounds, calculated in accordance with § 130.705(j) and (k).
(ii) Weight of VOC per volume of product, calculated in accordance with § 130.705(l).
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
