§ 130.707. Product dating.
(a) Product dating requirements.
(1) Each manufacturer of an adhesive, sealant, adhesive primer, sealant primer, surface preparation solvent or cleanup solvent product subject to this subchapter shall clearly display on each product container or package, the day, month and year on which the product was manufactured, or a code indicating that date.
(2) A manufacturer who uses the following code to indicate the date of manufacture will not be subject to the requirements of subsection (b)(1), if the code is represented separately from other codes on the product container so that it is easily recognizable:
YY DDD = Year Year Day Day Day
Where,
YY = Two digits representing the year in which the product was manufactured
DDD = Three digits representing the day of the year on which the product was manufactured, with ‘‘001’’ representing the first day of the year, ‘‘002’’ representing the second day of the year, and so forth (that is, the ‘‘Julian date’’).
(3) The product date or date-code required by this section must be displayed on each product container or package before the product is sold, supplied or offered for sale in this Commonwealth.
(4) The date or date-code information must be located on the container or inside the cover or cap so that it is readily observable or obtainable (by simply removing the cover or cap) without irreversibly disassembling a part of the container or packaging.
(5) For the purposes of this subsection, information may be displayed on the bottom of a container as long as it is clearly legible without removing any product packaging.
(6) The requirements of this subsection do not apply to products containing either of the following:
(i) No VOCs.
(ii) VOCs at 0.10% by weight or less.
(b) Additional product dating requirements.
(1) If a manufacturer uses a code other than the code described in subsection (a)(2) indicating the date of manufacture for an adhesive, sealant, adhesive primer, sealant primer, surface preparation solvent or cleanup solvent product subject to this subchapter, the manufacturer must file an explanation of the date portion of the code with the Department before the product is sold, supplied or offered for sale in this Commonwealth.
(2) If a manufacturer changes a code indicating the date of manufacture for a product subject to paragraph (1), the manufacturer must file an explanation of the modified code with the Department before products displaying the modified code are sold, supplied or offered for sale in this Commonwealth.
(3) A person may not erase, alter, deface or otherwise remove or make illegible a date or code indicating the date of manufacture from a regulated product container without the express authorization of the manufacturer.
(4) Date code explanations for codes indicating the date of manufacture are public information and may not be claimed as confidential.
Cross References This section cited in 25 Pa. Code § 130.708 (relating to sell-through of products).
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
