§ 145.76. Additional requirements to provide heat input data.
The owner or operator of a unit that monitors and reports NOx mass emissions using a NOx concentration system and a flow system shall also monitor and report heat input at the unit level using the procedures in 40 CFR Part 75 (relating to continuous emission monitoring).
Cross References This section cited in 25 Pa. Code § 145.4 (relating to applicability); 25 Pa. Code § 145.5 (relating to retired unit exemption); 25 Pa. Code § 145.30 (relating to compliance certification report); 25 Pa. Code § 145.42 (relating to NOx allowance allocations); 25 Pa. Code § 145.54 (relating to compliance); 25 Pa. Code § 145.70 (relating to general monitoring requirements); 25 Pa. Code § 145.71 (relating to initial certification and recertification procedures); 25 Pa. Code § 145.75 (relating to petitions); 25 Pa. Code § 145.81 (relating to opt-in source general provisions); 25 Pa. Code § 145.83 (relating to applying for a NOx budget opt-in approval); 25 Pa. Code § 145.84 (relating to opt-in process); 25 Pa. Code § 145.87 (relating to opt-in unit change in regulatory status); and 25 Pa. Code § 145.88 (relating to NOx allowance allocations to opt-in units).
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
