25 Pa. Code § 77.572. Permit line setback.

§ 77.572. Permit line setback.

(a)  Highwalls shall be set back from the boundary of the area covered by a bond under §  77.193 (relating to requirement to file bond). The setback shall be of sufficient width to accomplish the following:
   (1)  Prevent possible slumping or failure at or beyond the perimeter of the permit area.
   (2)  Allow for the development of final reclamation slopes.
(b)  The minimum setback distance shall be 25 feet (7.62 meters) in consolidated material, in unconsolidated material, the minimum setback distance shall be equal to the height of the exposed unconsolidated material unless otherwise approved by the Department.
(c)  The setback shall be shown on the cross sections.

Source

   The provisions of this §  77.572 adopted March 16, 1990, effective March 17, 1990, 20 Pa.B. 1643; amended January 30, 1998, effective January 31, 1998, 28 Pa.B. 619. Immediately preceding text appears at serial page (198759).

No part of the information on this site may be reproduced for profit or sold for profit.

This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.