Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 54 Pa.B. 5598 (August 31, 2024).

25 Pa. Code § 85.22. Methods of determining minimum bluff setback distances.

§ 85.22. Methods of determining minimum bluff setback distances.

 (a)  The Department will develop minimum bluff setback distances for each municipality tentatively designated as having a bluff recession hazard area by applying the following formula:

Rate ofAppropriateMinimum
BluffxLife Span=Bluff Setback
Recessionof StructureDistance

   (1)  The rate of bluff recession is the average annual rate of recession for all the municipality’s bluffs as calculated by the Department.

   (2)  The appropriate life span of a structure is 50 years for residential homes, 75 years for commercial structures, and 100 years for light and heavy industrial structures.

 (b)  The minimum bluff setback distance may not be less than 25 feet. When use of the formula identified in subsection (a) would produce a minimum bluff setback distance of less than 25 feet, the formula does not apply and 25 feet shall be the minimum bluff setback distance.

Source

   The provisions of this §  85.22 amended September 18, 2009, effective September 19, 2009, 39 Pa.B. 5415. Immediately preceding text appears at serial pages (234481) to (234482).

Cross References

   This section cited in 25 Pa. Code §  85.24 (relating to activities within a bluff recession hazard area); and 25 Pa. Code §  85.35 (relating to municipal adoption of more restrictive ordinance).



No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.