§ 1.195. Marks for postmortem inspections; inspection of unacceptable equipment and facilities.
(a) The official marks required for use in postmortem inspection and identification of adulterated products and insanitary equipment and facilities are the following:
(1) The following tag (Form AAI-270) which is used to retain carcasses and parts of carcasses in the slaughter department, bears the legend Pa. Retained:
(2) The Pa. Retained mark which is applied to products and articles as prescribed in this chapter and used to identify insanitary buildings, rooms or equipment is applied by means of the following paper tag (Form AAI-270) bearing the legend Pa. Retained:
(3) The Pa. Inspected and Condemned mark shall be applied to products condemned as prescribed in Subchapter C (relating to postmortem inspections) by means of a brand and is in the following form:
(4) The Pa. Rejected tag is used to identify insanitary buildings, rooms, or equipment as prescribed by § § 1.511.67 or other conditions that would make them unacceptable for use and is applied by means of a paper tag (Form AAI-132) bearing the legend Pa. Rejected.
(b) The Pa. Retained, and all other brands, stamps, labels and other devices approved by the Department and bearing any official mark prescribed in subsection (a) shall be official devices for purposes of the act.
Source The provisions of this § 1.195 amended December 17, 1971, 1 Pa.B. 1825. Immediately preceding text appears at serial page (1263) to (1265).
Cross References This section cited in 7 Pa. Code § 1.194 (relating to seals for transportation of products).
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.