Pennsylvania Code
Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 54 Pa.B. 1806 (March 30, 2024).

25 Pa. Code § 139.14. Emissions of VOCs.

§ 139.14. Emissions of VOCs.

 (a)  The following are applicable to tests for determining volatile organic content:

   (1)  Test methods and procedures for the total volatiles content, solids content, exempt solvent content, water content and density of surface coatings shall be equivalent to those specified in §  139.4(1) and (5) (relating to references).

   (2)  Test methods and procedures for VOCs in effluent water shall be equivalent to those specified in §  139.4(16), expressed as pentane.

   (3)  For determining the solvent content of wastes in dry cleaning facilities, test methods and procedures shall be equivalent to those specified in §  139.4(17).

   (4)  Results shall be reported in accordance with the units specified in the appropriate section of Chapter 129 (relating to standards for sources).

 (b)  The following are applicable to tests for determining the emissions of VOCs:

   (1)  Test methods for VOC emissions shall use a technique having at least a 95% collection efficiency for VOCs.

   (2)  Except for those sources or systems specified in this subsection, the test methods and procedures and equipment for VOCs, excluding carbon dioxide, carbon monoxide and methane shall be equivalent to those specified in EPA Method 25 or as specified in §  139.4(5). The owner or operator of a source may exclude ethane from the VOC measurement. If ethane is excluded, the measurement of ethane shall be reported separately.

   (3)  For gasoline vapor recovery systems, test methods and procedures and equipment for VOCs shall be equivalent to those specified in EPA Method 25B or as specified in §  139.4(5).

   (4)  For determining the magnitude of VOC leaks from petroleum refinery equipment, from synthetic organic chemical and polymer manufacturing equipment and from surface active agent manufacturing equipment, test methods and procedures shall be equivalent to those specified in EPA Method 21 or as specified in §  139.4(5). The owner or operator of a source may exclude methane and ethane from this measurement. If methane and ethane are excluded, the measurement of methane and ethane together shall be reported.

   (5)  For determining the VOC leak tightness of truck tanks, test methods and procedures shall be equivalent to those specified in EPA Method 27 or as specified in §  139.4(5).

   (6)  For determining the magnitude of VOC leaks from gasoline tank trucks and vapor collection systems, test methods and procedures shall be equivalent to those specified in EPA Method 21 or as specified in §  139.4(5).

   (7)  Results shall be reported in accordance with the units specified in the appropriate section of Chapter 129.

   (8)  Test methods for the determination of RVP in gasoline shall be in accordance with the procedures in 40 CFR Part 80, Appendix E (relating to test for determining Reid vapor pressure (RVP) of gasoline and gasoline-oxygenate blends).

Source

   The provisions of this §  139.14 adopted March 3, 1972, effective March 20, 1972, 2 Pa.B. 383; amended April 27, 1979, effective August 1, 1979, 9 Pa.B. 1447; corrected May 11, 1979, effective August 1, 1979, 9 Pa.B. 1534; amended June 19, 1981, effective June 20, 1981, 11 Pa.B. 2118; amended August 12, 1983, effective August 13, 1983, 13 Pa.B. 2478; amended August 24, 1984, effective March 24, 1984, 14 Pa.B. 3090; amended May 6, 1988, effective May 7, 1988, 18 Pa.B. 2098; amended November 25, 1994, effective November 26, 1994, 24 Pa.B. 5899; amended October 31, 1997, effective November 1, 1997, 27 Pa.B. 5601; amended June 9, 2000, effective June 10, 2000, 30 Pa.B. 2995. Immediately preceding text appears at serial pages (244316) and (237321) to (237322).

Cross References

   This section cited in 25 Pa. Code §  123.45 (relating to alternative opacity limitations); 25 Pa. Code §  129.58 (relating to petroleum refineries—fugitive sources); 25 Pa. Code §  129.62 (relating to general standards for bulk gasoline terminals, bulk gasoline plants and small gasoline storage tanks); 25 Pa. Code §  129.71 (relating to synthetic organic chemical and polymer manufacturing—fugitive sources); and 25 Pa. Code §  129.81 (relating to organic liquid cargo vessel loading and ballasting).


No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.