Pennsylvania Code
Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 54 Pa.B. 5598 (August 31, 2024).

34 Pa. Code § 3a.161. Modular boilers.

§ 3a.161. Modular boilers.

 (a)  A modular boiler as defined in ASME Code, section IV shall be installed in accordance with §  3a.36 (relating to clearances). The distance between modules may be reduced to the manufacturer’s recommendations if the entire modular boiler system meets the 30-inch clearance requirements.

 (b)  A modular boiler must have only one inlet and one outlet valve, as required by ASME Code, section IV. The boiler controls must comply with ASME Code, section IV and ASME/CSD1.

 (c)  Inspection of modular boilers shall be performed in accordance with §  3a.111(1)—(7) (relating to field inspections).


No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.