34 Pa. Code § 3a.169. Fuel trains and piping systems.

§ 3a.169. Fuel trains and piping systems.

(a)  The piping of low-pressure steam systems, except PVC materials, must comply with Chapters 10 and 12 of the IMC.
(b)  The piping of low-pressure hydronic piping systems, except PVC materials, must comply with Chapter 12 of the IMC.
(c)  The design and installation of high-pressure steam and high temperature hot water piping must comply with ASME B31.1.
(d)  The repair of high pressure/temperature piping systems installed before 1998 must comply with the code of construction.
(e)  The installation of fuel trains and associated piping must comply with ASME/CSD1.
(f)  Inspection of fuel trains and piping systems shall be determined by the type of boiler to which the system is attached and performed in accordance with §  3a.111 (relating to field inspections).

No part of the information on this site may be reproduced for profit or sold for profit.

This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.