§ 47.376. Terminals.
(a) The ends of the belt shall be fitted with approved heavy forged or cast metal safety terminals of brass, or other approved durable corrosive-resistive materials. If cast they shall be properly annealed.
(b) Safety belt terminals shall have slots not less than 4 inches long. The slots shall be 1/2 inch wide and that portion of the slot which passes over the anchor head shall be 7/16 inch deep by 1 inch wide and shall have an approved catch to prevent the automatic or accidental release of the terminal.
(c) Right angle sections of terminals shall have 1/8 inch radius fillets in all inside corners.
(d) All other metal parts, fittings, rivets and thimbles shall be of the same strength and specifications as the safety terminals.
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
