§ 1001.32. Filing specifications.
(a) A filing made with the Authority must be:
(1) Typewritten. Pleadings, submittals or other documents filed in proceedings, if not printed, must be typewritten on paper cut or folded to letter size, 8 to 8 1/2 inches wide by 10 1/2 to 11 inches long, with left-hand margin at least 1 inch wide and other margins at least 1 inch. The impression must be on only one side of the paper, unless there are more than four pages, and be double spaced, except that quotations in excess of a few lines must be single spaced and indented. Reproduced copies will be accepted as typewritten, if copies are clearly legible.
(2) Printed. Printed documents must be at least 12-point type on unglazed paper, cut or folded so as not to exceed 8 1/2 inches wide by 11 inches long, with inside margin at least 1 inch wide, and with double-leaded text and single-leaded, indented quotations.
(3) Bound. Pleadings, submittals and other documents, other than correspondence, must be stapled, fastened or otherwise bound at the left side only.
(b) Supersession. Subsection (a) supersedes 1 Pa. Code § 33.2 (relating to form).
Cross References This section cited in 52 Pa. Code § 1005.21 (relating to petitions generally); and 52 Pa. Code § 1005.41 (relating to answers to complaints, petitions, motions and other filings requiring a response).
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
