§ 105.14. Required equipment.
The following equipment is required for the operation of a maintenance and calibration station. Suitable manufacturers and model numbers are listed, however, equivalent equipment or an alternative technique approved by the Communications Division, State Police is acceptable:
(1) Power supplyHewlett Packard Model 6177C.
(2) Frequency counterHewlett Packard Model 5314A.
(3) Power Meter and Thermistor MountsHewlett Packard Models 432A, X486A and K486A.
(4) MultimeterHewlett Packard Model 410C.
(5) AC VoltmeterHewlett Packard Model 400D or Leader Model LMV-181A.
(6) Function GeneratorHewlett Packard Model 3311A.
(7) Variable AttenuatorsHewlett Packard Models X382A and K382A.
(8) RF Absorption ChamberSee Appendix A, Figure 1.
(9) Frequency CounterHewlett Packard Models 5342A or 5343A.
(10) Calibrated AntennasNarda Models 638 and 640.
(11) Coaxial AdaptersNarda Models 4601 and 4608B.
(12) Pin Diode SwitchGeneral Microwave F9114.
(13) MicrophoneElectrovoice 631A.
(14) 4 Watt HF or VHFAM Modulated Signal Source.
(15) Base Loaded Whip Antenna Tuned to paragraph (14).
Source The provisions of this § 105.14 adopted August 26, 1977, effective August 27, 1977, 7 Pa.B. 2422; republished and compiled August 1, 1980, effective August 2, 1980, 10 Pa.B. 3199; amended January 15, 1982, effective January 16, 1982, 12 Pa.B. 299; readopted December 4, 1987, effective December 5, 1987, 17 Pa.B. 5051; amended February 17, 1989, effective February 18, 1989, 19 Pa.B. 640. Immediately preceding text appears at serial pages (122745) to (122748).
Cross References This section cited in 67 Pa. Code § 105a.4 (relating to system and speed timing device use and certification).
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.