Pennsylvania Code
Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 54 Pa.B. 5598 (August 31, 2024).

25 Pa. Code § 126.303. Compliance and test methods.

§ 126.303. Compliance and test methods.

 Compliance with the 7.8 pounds per square inch RVP standard shall be determined by use of the sampling and testing methods specified in this section. Sampling or testing of gasoline required by this chapter shall be accomplished as follows:

   (1)  Sampling of gasoline for the purpose of determining compliance with this subchapter shall be conducted in accordance with 40 CFR Part 80, Appendix D (relating to sampling procedures for fuel volatility).

   (2)  Testing of gasoline for purposes of determining compliance with this rule shall be conducted in accordance with 40 CFR Part 80, Appendix E (relating to test for determining Reid Vapor Pressure (RVP) of gasoline and gasoline-oxygenate blend).

Source

   The provisions of this §  126.303 amended October 1, 1999, effective October 2, 1999, 29 Pa.B. 5089. Immediately preceding text appears at serial pages (237304) and (250843).


No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.