§ 39.115. Grounding noncurrent-carrying parts.
(a) Exposed noncurrent-carrying metal parts of rotating electrical supply equipment shall be permanently grounded in accordance with the requirements for grounding provided in § 39.103 (relating to protective grounding).
(b) If machine frames, such as those of series are light generators or direct current railway generators, are necessarily ungrounded, suitable insulating floors, mats, or platforms providing good footing shall be so placed that no person may readily touch the machine frame unless standing on such floor, mat, or platform.
(c) If two or more machines, either of which operates at over 150 volts to ground, are mechanically coupled together and the operator is able to touch the frames of more than one at a time, the frames of all such shall be permanently grounded or bonded together electrically. This provision may be waived under the following circumstances:
(1) If high-voltage series generator sets in existing installations are used and for operating reasons the generators have their frames insulated from the ground and the motor frame is grounded.
(2) If it is impracticable to place insulating barriers between the grounded and ungrounded frames.
(d) Exciters and auxiliary circuits electrically connected to generators or other machines over 750 volts to ground (with frames ungrounded) shall be installed, protected, and identified as machines and circuits of the same voltage as that of the machine for which they are auxiliaries. Reference should also be made to § 39.132 (relating to grounding low voltage circuits of instrument transformers).
Cross References This section cited in 34 Pa. Code § 39.103 (relating to protective grounding).
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.