Pennsylvania Code
Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Code website reflects the Pennsylvania Code changes effective through 54 Pa.B. 6234 (September 28, 2024).

67 Pa. Code § 105.1. Purpose.

§ 105.1. Purpose.

 This chapter governs the calibrating and testing of mechanical, electrical and electronic speed-timing devices by stations appointed by the Department.

Source

   The provisions of this §  105.1 adopted August 26, 1977, effective August 27, 1977, 7 Pa.B. 2422; amended August 18, 1978, effective August 19, 1978, 8 Pa.B. 2311; republished and compiled August 1, 1980, effective August 2, 1980, 10 Pa.B. 3199; amended January 15, 1982, effective January 16, 1982, 12 Pa.B. 299; amended March 30, 1984, effective March 31, 1984, 14 Pa.B. 1089; amended August 22, 1986, effective August 23, 1986, 16 Pa.B. 3119; readopted December 4, 1987, effective December 5, 1987, 17 Pa.B. 5051. Immediately preceding text appears at serial page (111301).

Cross References

   This section cited in 67 Pa. Code §  105a.4 (relating to system and speed timing device use and certification).


No part of the information on this site may be reproduced for profit or sold for profit.


This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.