§ 165.7. Mounting.
(a) General. Both the permanently mounted emblem and the portable emblem shall be mounted point up, see Figure 1, in a plane perpendicular to the direction of travel plus or minus 10 degrees. The emblem shall be placed centrally at the rear of the vehicle, unobscured and 2 to 6 feet (.61 to 1.83 meters) above the ground measured from the lower edge of the emblem. It may be permanently attached to equipment when practical. Portable emblems shall be mounted by using bracket sockets and identification emblem brackets specified in ASAE Standard ASAE S277, ‘‘Mounting Brackets and Socket for Agricultural and Industrial Equipment Warning Lamp and Slow-Moving Vehicle (SMV) Identification Emblem.’’
(b) Other devices. The emblem shall not replace such warning devices as tail lamps, reflectors, flashing lights or warning flags and is not to be used as a clearance marker for wide equipment.
Source The provisions of this § 165.7 amended July 21, 1978, effective July 22, 1978, 8 Pa.B. 2076.
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
