§ 171.26. Heating system.
The chassis engine shall be equipped with plugged openings to supply hot water for the school bus heating system. The openings shall be suitable for attaching 3/4 inch pipe thread/hose connectors. The engine shall be capable of supplying water having a temperature of at least 170° F at a flow rate of 50 pounds/per minute at the return end of 30 feet of 1 inch inside diameter automotive hot water heater hose. See SBMI Standard No. 001 in Appendix A.
Authority The provisions of this § 171.26 amended under the Vehicle Code, 75 Pa.C.S. § § 4103, 4551—4553 and 6103.
Source The provisions of this § 171.26 adopted August 19, 1983, effective August 20, 1983, 13 Pa.B. 2561; readopted December 4, 1987, effective December 5, 1987, 17 Pa.B. 5052; amended September 13, 1996, effective September 14, 1996, 26 Pa.B. 4411. Immediately preceding text appears at serial page (122784).
No part of the information on this site may be reproduced for profit or sold for profit.
This material has been drawn directly from the official Pennsylvania Code full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.
